Used Centrifugal Separators in Japan

1989 Tanaka Giken Industry AE 55 × 22
- Manufacturer: Giken
55-inch SUS Fully automatic type Hydraulic unit (0.75kw) Basket capacity: 430L Rotation speed: 900rpm Centrifugal effect: 600G The entire machine is disassembled and serviced at our maintenance shop, so you can b...
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: 巴工業
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: 巴工業
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan
Tomoe Kogyo AS-26
- Manufacturer: 巴工業
Three-phase separation Rotation speed: 15,000 rpm With startup board Click here to see a video of the trial run when the maintenance was completed (YouTube).
Hiroshima, Japan
Alfa Laval (DeLaval) SSG109
- Manufacturer: アルファラバル(デラバル)
3.7KW 200V 7900rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Sealed wetted parts: SUS Main body only
Kure, Japan
There is no nameplate 24 吋
- Manufacturer: No nameplate
Basket SUS Casing SS + resin sheet Upper discharge type Since the entire disassembly and maintenance is performed at our maintenance shop, you can be assured of the finish of the mechanical parts as well as the e...
Hiroshima, Japan
1989 Tanabe Wiltech ACT-30
- Manufacturer: Tanabe Wiltech
30" SUS Fully automatic, explosion-proof Power: 7.5kw (d2G4) | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Kyoritsu Manufacturing Co., Ltd. 48 type
- Manufacturer: Kyoritsu Seisakusho
SUS, 48", manual scraper, 725 rpm The entire machine is disassembled and serviced at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the external appearance. We can fi...
Hiroshima, Japan
Tanabe T-36
- Manufacturer: Tanabe
36" SUS, fully automatic (without scraper), 1150 rpm, explosion-proof. No control panel.
Hiroshima, Japan
1996 Tanabe Wiltech DAC-42
- Manufacturer: Tanabe Wiltech
Explosion-proof, 42" fully automatic bottom discharge.
Hiroshima, Japan
1992 Tanabe CO-24
- Manufacturer: タナベ製
24-inch type, top discharge type, with manual brake
Kure, Japan
1985 Matsumoto Kikai MARK III 48×36
- Manufacturer: 松本機械
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
1999 Tanabe Wiltec O-24
- Manufacturer: タナベウィルテック
Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L
Hiroshima, Japan
2000 Tanabe Wiltech DAC-30
- Manufacturer: タナベウィルテック
30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
Mitsubishi SJ 6000 Centrifugal Separator
- Manufacturer: Mitsubishi
- Model: SJ 6000
Good condition Mitsubishi SJ 6000 Centrifugal Separators manufactured in 2010. Located in Japan and other countries. Click request price for more information.
Japan