Building Filters

Used Centrifugal Separators in Hiroshima, Japan

2024 Tanabe Wiltech SHC-400D
- Manufacturer: タナベウィルテック
Material of main parts such as screws: SUS316 (stellited cutting edges). Currently 400V specification, but rewinding to 200V is available. Screen hole diameter 100mm Basket diameter φ400
Hiroshima, Japan
1985 Matsumoto Kikai MARK III 48×36
- Manufacturer: 松本機械
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
1999 Tanabe Wiltec O-24
- Manufacturer: タナベウィルテック
Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L
Hiroshima, Japan
2000 Tanabe Wiltech DAC-30
- Manufacturer: タナベウィルテック
30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: タナベ
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: タナベ
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: 共立製作所
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
Tanabe 42-inch
- Manufacturer: タナベ
42", top discharge type, perforated type. Basket SUS, others SS.
Hiroshima, Japan
2006 Kotobuki SC-170
- Manufacturer: 寿工業
Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...
Hiroshima, Japan
Tomoe Kogyo P-3400
- Manufacturer: 巴工業
3650rpm / approx. 3000G. Gear ratio 1/165. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1991 Mitsubishi Kakoki KZV25ML
- Manufacturer: 三菱化工機
Power: 11kw/200V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
1987 Tanabe Wiltech Z32-V-HP1
- Manufacturer: タナベウィルテック
5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
1979 Shear Press P-3400L
- Manufacturer: シャープレス
30kw 4000rpm/3200G Tile specification Power: 30kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
IHI HS-40L
- Manufacturer: IHI
- Model: HS-40
4000rpm/3500G Nominal capacity: 7t/h Power: 22kw/200V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Mitsubishi Kakoki KVZ25ML
- Manufacturer: 三菱化工機
7.5kw 440V Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan