- Trusted Seller
Single roller mill 18″x4′ Krupp brand
used
- Manufacturer: Krupp
Single roller mill 18″x4′ Krupp brand Brand: Krupp With feeder. PCP
Hermosillo, Mexico - Trusted Seller
Krupp DBst
used
- Manufacturer: Krupp
- Model: DBST
Pre-owned die-flanging machine. Tooling: 153 mm | Can height min.: 170 mm | Can height max.: 290 mm | Can / ends diameter maximum: 153 mm | Can shape: round | Speed (up to): 100-220 cans per minute
Middelharnis, Netherlands - Trusted Seller
Deinze, Belgium - Trusted Seller
Krupp DBst
used
- Manufacturer: Krupp
- Model: DBST
Tooling: 127 mm | Can height min.: 127 mm | Can height max.: 236 mm | Can shape: round | Speed (up to): 60-180 cans per minute
Middelharnis, Netherlands - Trusted Seller
1971 Krupp DBst
used
- Manufacturer: Krupp
- Model: DBST
Pre-owned die-flanging machine. Tooling: 42 mm | Can shape: round | Speed (up to): 400 cans per minute
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt II
used
- Manufacturer: Krupp
- Model: SDVT
Pre-owned duplex slitter with feeding unit. The duplex slitter is equipped with a tandem axis frame for the second slitting operation, significantly reducing the time needed to adjust the can height. Especially u...
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt II R
used
- Manufacturer: Krupp
- Model: SDVT
Pre-owned double slitting machine with automatic sheet feeder. The in total approx. 29 set of knives can be adjusted hydraulically.
Middelharnis, Netherlands - Trusted Seller
1978 KRUPP PEDRN-100
used
- Manufacturer: Krupp
pressure 100 t throat - mm stroke 8 - 116 mm total power requirement 8 kW weight of the machine ca. 7,5 t dimensions of the machine ca. ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Strok...
Gorxheimertal, Germany - Trusted Seller
Krupp 1.25m Dia. x 3.0m Rod Mill (Stabrohrmühle)
used
- Manufacturer: Krupp
Size: 1.25m Diameter x 3.0m Long (4ft x 12ft) | Feed type: Drum Feed | Discharge type: Trunnion Overflow | Liner configuration: Rubber Lined | Lube system: Central Greasing | Drive: 50kW Electric Motor with Redu...
Europe - Trusted Seller
KRUPP PST-A 160
used
- Manufacturer: Krupp
- Model: PST-A 160
- Stroke: 210 mm
The was produced in 1980. The machine has a pressing force of 160 tons, while the cutting force is 400 KN. The press can work on 11 stages, including the cutting stage. The ram is capable of 15-75 strokes per min...
- Trusted Seller
1972 KRUPP PDqV 4-500
used
- Manufacturer: Krupp
After the GO in 2008 the press was in operation for a maximum of 100 hours. In the years 1972-208 the press was in operation for two shifts.
Brno, Czech Republic - Trusted Seller
1972 Krupp PDqV 4 - 500
used
- Manufacturer: Krupp
- Model: PDQV 4 - 500
- Stroke: 850 mm
The machine is in good condition, possible to test it. Retrofit of electro cabinet and mechanical parts. DRO.
Brno, Czech Republic 
1980 QUARTO cold rolling mill 500 mm
used
- Manufacturer: KRUPP
Main motor speed: 970-1036 rpm | Small rolls speed: 44 rpm | Small rolls diameter: 250 mm | Big rolls diameter: 500 mm | Roll length: 500 mm | Workable thickness: about 40 mm | Main motor force: HP 180 / kw 133 ...
Casale Sul Sile, Italy- Trusted Seller
Welding wire 0.8 mm weight 15 kg from Krupp – NOVONIT 4316 27303
used
- Manufacturer: Krupp
Wire electrode, welding rod, welding wire, flux cored wire
$94 USDWiefelstede, Germany - Trusted Seller
2012 KRUPP H-FRAME
used
- Manufacturer: Krupp
- Capacity: 350
- Stroke: 250
Capacity: 350 | Stroke: 250 | Slide adjustment: 200 | Bed area x-y: 2800 X 1800 | Slide base area x - y: 2500 X 1800 | Shut height: 900 | Rolling boster: NA | Die cushion capacity: NA
New Delhi, India 
Krupp SDVT Bending & Forming
used
- Manufacturer: Krupp
- Model: SDVT
Good condition Krupp SDVT Bending & Formings manufactured in 1981. Located in Spain and other countries. Click request price for more information.
Spain
Tip: Enter manufacturer, model or keyword
