Used Lathes in Bern, Switzerland

TECHNIKUM BIEL 102

• Manufacturer: TECHNIKUM BIEL

Centre height: 102 mm | Distance between centres: 370 mm | Inner taper type: 20 W | From: 50 t/min | Up to: 1200 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 450 kg | Length: 1200 mm | Width: 700...

HABEGGER NEOTOR

• Manufacturer: HABEGGER
• Spindle bore: 20 millimeter

Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock: 2 CM | Voltage 50 hz 3x: ...

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS R 10

• Manufacturer: Tornos
• Model: R10
• Spindle bore: 13 millimeter

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

SIMONET 102

• Manufacturer: SIMONET
• Spindle bore: 20 millimeter

Control: BERGER Villeret | Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock...

TRAUB A 15

• Manufacturer: Traub
• Model: A15
• Spindle bore: 15 millimeter

Max. work piece diameter: 15 mm | Turning length: 70 mm | Spindle hole: 15 mm | Max. treading diameter: 8 M | Production capacity: 28 - 2100 p/h | Number of spindle speeds: 12 | From: 900 t/min | Up to: 6500 t/m...

TORNOS T 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS M 7

• Manufacturer: Tornos
• Model: M7
• Spindle bore: 8 millimeter

Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...

TORNOS T 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

3-JAWS CHUCK PRATT BURNERD

Ø 160 mm for Studer S30

3-JAWS CHUCK PRATT BURNERD

Ø 160 mm for Studer S30

BENCH “SCHAUBLIN” TYPE KANYA NON MOTORISED

• Manufacturer: Schaublin

180x80x92 cm – cabinet LISTA with 6 drawers

CHUCK ADAPTER PLATE Ø130 mm for spindle type W-25″”

W-25, livré avec bague de sécurité

2008 LNS Micro 8

• Manufacturer: LNS

Control: GE FANUC Series 32i-Model A | Number of axis total: 7 | Workpiece length max.: 20 mm | Max. bar diameter: 10 mm | Inner taper type: F13 | From: t/min | Up to: 12000 t/min | C axis (spindle,resolution): ...