Used Processing in Victoria, Australia

CONTECH ENGINEERING 3.1 x 300
- Manufacturer: CONTECH ENGINEERING
Mild steel conveyor with food grade plastic belt. 0.55kw SEW 19 rpm geared drive. Complete with pneumatic arm to push product off the conveyor from the side. Conveyor deck height is 950mm from ground. Mounted on ...
Melbourne, Australia
FRESCO SYSTEMS 30
- Manufacturer: FRESCO SYSTEMS
Fresco systems stainless steel screw feeder with mixer. 0.37kw Geared motor @ 56RPM Mixer 0.55kw Geared motor @ 42rpm Auger Total Screw Length 1000mm long
Melbourne, Australia
DCE UMA254
- Manufacturer: Donaldson / Torit / DCE
- Model: UMA
Used Dust Collector with automatic timed shaker. DCE's most powerful 250 series extractor Filter Area 250ft2 / 25m2 Unit runs well.
Melbourne, Australia
DCE UMA 104 G3
- Manufacturer: Donaldson / Torit / DCE
- Model: UMA
DCE Unimaster UMA 104 Dust Collector. 3 Phase, 380 - 415 V, 1.5 kW Mechanical bag shaker for cleaning filters. Run and tested. Unit in good condition.
Melbourne, Australia
Barry Brown 1000
- Manufacturer: Barry Brown
- Capacity: 1,000 liter
1000 Litre insulated heating tank / kettle. Food grade stainless steel. Closed top. 3 Phase, 415V, 30kW. 4 x 7.5kW Ceramic bobbin heating elements in total. 3 in working order. (1 element is unserviceable) Elemen...
Melbourne, Australia
ALFA LAVAL BRPX 617
- Manufacturer: Alfa-Laval
- Model: BRPX
Alfa Laval BRPX 617 Clarifier - Max bowl speed 4180 RPM, rated @ 30,000 LPH, sludge cap 25.7 L. Self-cleaning design, (requiers a 45 KW motor 380/660/3/50/1472 RPM), sludge tank, some tools, and manuals. Very goo...
Melbourne, Australia
Shell and Tube Heat Exchanger (SS316)
Stainless Steel (SS316) Heat Exchanger 2 x 1825 mm long Shell with 10 x 15 mm tubes in each shell. Shell diameter 125mm 50 mm inlets 150 psi bolt on flanges flanges. Surface Area of inner tubes is 2.2m2
Melbourne, Australia
Stainless Steel Agitator
Stainless steel agitator with motor. (Yellow Motor) 3 Phase, 415W, 2.2kW Electric motor. Agitator 2.4 metres long. Motor does not turn. Price is for item as is, item can be overhauled for additional cost.
Melbourne, Australia
TRIPAX 3.3 X 0.8
- Manufacturer: TRIPAX
TRIPAX Engineering inspection / sorting conveyor. Rollers gently turn product at a constant speed, allowing inspectors to view all sides. Stainless steel frame. Aluminium rollers. 3 Phase, 415V, 1.1kW gearmotor. ...
Melbourne, Australia
SHARPLES PM35000
- Manufacturer: Sharples
- Model: PM35000
Used - Sharples PM-35000 Super-D-Canter Centrifuge. Stainless steel construction on product contact areas. Max bowl speed 3150 rpm, 360 degree solids discharge ports with tungsten carbide wear protection inserts...
Melbourne, Australia
Cleated Conveyor
Incline cleated conveyor 3m long x 400mm wide Cleats with sidewalls. Runs at 1m per 3 seconds. It takes 9 seconds for an item to travel the length of the belt. Runs well, 415V 3 phase power.
Melbourne, Australia
Air Receiver
Heavy Duty Air Receiver Test Pressure 900 kpa Design Pressure 1050kpa. Temp Rating 120c 750mm dia x 2150 straight side Overall height 2850 mm
Melbourne, Australia
St/Steel Tank
- Capacity: 1,200 liter
Open top 1200Litre St/Steel tank Centre bottom discharge to a 2inch valve with CamLock fitting Side mounted Agitator, 1.5kw 415V Fork Lift Tynes on the side of the tank 1850mm dia x 900mm deep.
Melbourne, Australia
INVICTA 110 x 90
- Manufacturer: Invicta
Heavy duty Vibrating Table fitted with 2 vibrating motors. Mounted on springs with adjustable angles for the motors. Table size is 1100mm x 900mm Each motor is an INVICTA 2685Watts, 44145 Force (N), 5.1amp, 415V ...
Melbourne, Australia
CTS CTS 15
- Manufacturer: CTS
CTS 15 litre high speed mixer. Stainless steel internal bowl. Jacketed bowl with Grant hot oil boiler 240volt single phase, 2.2kw Baldor DC variable speed drive Last used to mix plastics.
Melbourne, Australia