Used Processing in Ontario, Canada

Gandus Saldatrici Tb - 3 Grease line heat Sealer

• Manufacturer: Gandus

-Shipping dimensions: Height - 20" x Width - 29" x Length - 16" -115 V -50/60Hz -Comes with case

Above Ground Steel Tank for Fuel/Oil

• Manufacturer: Hassco industries inc

-Shipping dimensions: length 36" x width 26" x height 60" -Double wall, ULC rated -227 L -2.5mm thick primary tank

Stainless-steel Holding Tank

-Diameter: 40" -Height: 40" -2" fill and discharge ports -Distance from the ground to the bottom outlet: 13.5" -22" top hatch -Cone bottom -Flange connections -Total dimensions: Height: 69" -Width: 40" -Approxima...

Stainless Steel Tank

-Supported with 4 legs -dome bottom -flat top -304 stainless steel -7069 IMP Gallons -Tank is 232" tall with the legs it is 273" tall

Stainless-steel Tank with Heating Coil

-Flat bottom and top -Heating coil on inside -Mixer with motor -Man hole on side is -Stainless steel with insulation on the out side -Bottoms valve is 4" -160" tall x 142" diameter -9191 imp gal -Level gage -Manh...

PFS Plastic Film Sealer

• Manufacturer: PFS

-Shipping dimensions: Height - 13" x Width - 18" x Length - 4" -Power: 150-300-400-650W (IMPULSE) -Source: AC110V/60Hz

Cone Mixer

• Manufacturer: SEW-Eurodrive

-Cone container with top mount mixer -Steel stand -SEW-EURODRIVE motor: 230/460 V, 60 Hz, 8.60/4.30 amp, 3 HP, 1700 RPM -Rapport ratio: 62.18:1 -Pos. Montage. Mtg: H5

Open Top Steel Tank

-Open top -Flat bottom -Tank dimensions: Height 60"/ 5ft x Diameter 43" x outlet 2" -Height from outlet to the ground: 8.5" -Total height: 78"

Hartzell Blower

• Manufacturer: Hartzell

-Inlet width: 35" -Inlet height: 27.5" with Camfil filter holder -Outlet diameter: 24.5" -Manufacturer: Hartzell Air Movement -Model number: A54-H-217VB---STFQL -CFM: 2520 -SP: 5 -Mtr. HP: 5 -Fan RPM: 2723 -Mtr. ...

Stainless steel tank with dome bottom

-4 stationary legs that are 30" tall -Dome bottom with a 3" drain on bottom -1" valve on the side at the bottom -Manhole on top -Tank dimensions: 35" diameter x 58" tall -200 IMP Gallon

Neutro-Vac

• Manufacturer: Simco

-Shipping dimensions: 30" L x 24" W x 52 1/2" H -Intake: 2" -208 V -60 Hz -3 Phase -1 Hp -Model: DC 550

Jacketed Stainless steel Tank with a Steam Heating Coil

-Diameter: 84" -Height of tank: 144" -24" side mounted inspection hatch -Distance from the bottom outlet to the ground: 10" -Jacketed -Has steam heating coil -Three viewing ports with LED lights on top of tank -7...

Open top Jacketed tank with mixer mount

-Has port for mixer to be mounted -Jacketed -Legs are 14" tall and stationary -Cone bottom -81" tall x 62" diameter -1.5 threaded port on side -3" bottom port

Mixing Tank

- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" -4 legs are 23" - Stainless steel - Chemical use - Dome bottom

Steel tank with mixer mount

-Tank dimensions: 81" tall x 62" diameter -Open top with mixer mount, lid included -Shipping dimensions: Height 105" x Width 65" x Length 65" -legs are 13" tall -3" port on the bottom -Cone bottom -1.5" threaded ...