Used Presses in Lesser Poland, Poland

STROMAB frame press

• Manufacturer: Stromab

Technical data: Hydraulic pressure pads Machine dimensions:

PGP Shelf Press

Technical data: Connection to CO. Hydraulic pressure Overall dimensions:

18/24 frame press

Technical data: Set of two segments of 3000 mm each Max width of the glued element: 200 mm 6 vertical clamps per segment 3 front horizontal pressers per segment Hydraulic clamps Overall dimensions: 1 piece £39,00...

BALDONI 4-shelf press

• Manufacturer: Baldoni

Technical data: Connection to CO. Hydraulic pressure Overall dimensions:

SIMI 6_25 Shelf Press

Technical data: Connection to CO Hydraulic pressure Safety switch Overall dimensions:

Manni 1300x3500 20/25 shelf press

• Manufacturer: Manni

Technical data: Central heating connection Hydraulic clamp Pneumatic side clamps Safety switch Overall dimensions:

HYDRAULIC PRESS WMW PYE PYXE 250 N

• Manufacturer: WMW

Machine in very good condition Emphasis: 250 ton | Dimensions of the bottom table: 1000 x 1000mm | Dimensions of the upper table: 1100 x 750mm | Outreach: 700mm | Maximum distance between tables: 1000mm | Weight ...

GRIGGIO 1300x3000 shelf press with its own heater 21/25

• Manufacturer: Griggio

Technical data: Heating source - internal heater Hydraulic pressure Safety switch Overall dimensions:

FAMAD frame press - 14 meters

• Manufacturer: Famad

Technical data: Total bonding length 14 meters Two independent elements with separate controls 6 m/b and 8 m/b Hydraulic controlled pressure pads 12 vertical clamps 28 horizontal/rear clamps Possibility to purcha...

STANKOIMPORT P6330 HYDRAULIC PRESS 100 TON

• Manufacturer: Stankoimport

WMW PYE63S1 hydraulic boom press

• Manufacturer: WMW
• Model: PYE 63 S

WMW PYE63S1 hydraulic boom press after a major overhaul. Technical parameters of the machine:

HYDRAULIC PRESS WMW PYE 100 SS

• Manufacturer: WMW
• Model: PYE 100 SS

Emphasis: 100 ton | Dimensions of the bottom table: 900 x 560mm | Outreach: 350mm | Dimensions of the upper table: 530 x 400mm | Maximum distance between tables: 800mm | Weight of the machine: approximately 5400...

A set of presses for śnudap

Body made of St3 sheet metal, 12mm thick Engine power: 2,2 kW | Diameter of the piston: 75mm | Max. stroke of the piston: 150mm | Number of piston movements: 5-15 / min

HYDRAULIC PRESS WMW PYE 250 S

• Manufacturer: WMW

The machine imported from Germany. Emphasis: 250 ton | Dimensions of the bottom table: 900 x 660mm | Dimensions of the upper table: 520x480mm | Outreach: 370mm | Max. distance between tables: 1000mm | Weight: app...

WMW PYE 160 S Hydraulic Press

• Manufacturer: WMW
• Model: PYE 160

Emphasis: 160 ton | Dimensions of the bottom table: 800 x 660mm | Dimensions of the upper table: 400 x 400mm | Maximum distance between tables: 1000mm | Maximum current consumption: 10,5 kW | Weight of the machi...