Used Harvester Headers

Trusted Seller
2014 MAC DON FD75
- Manufacturer: MacDon
- Model: FD75
- Cutting width: 40 foot
2014 MacDon FD75-S - Very Nice - Field Ready -40' Width. -New guards and sections 800 acres ago. -Belts are in good condition (one small tear in the center of one but it does not affect performance and has not go...
$36,500 USD
Get financing
Est. $687/mo
Gary, SD
Trusted Seller
2023 JOHN DEERE HD50F
- Manufacturer: John Deere
- Model: HD50F
- Cutting width: 50 foot
Poly skid shoes: Yes | Divider rods: Yes | Combine adapter: Yes | Cutterbar type: Flex | Gathering type: Draper | Auto contour: Yes | Auto height control: Yes | Auto reel speed control: Yes | Reel type: Flip Ove...
$75,000 USD
Get financing
Est. $1,412/mo
Gary, SD
Trusted Seller
2010 SHELBOURNE REYNOLDS CVS32
- Manufacturer: Shelbourne
- Model: CVS32
- Cutting width: 32 foot
Cutterbar type: Rigid | Gathering type: Stripper | Cutting width: 32 ft
$22,500 USD
Get financing
Est. $423/mo
Gary, SD
Trusted Seller
2011 JOHN DEERE 615P
- Manufacturer: John Deere
- Model: 615P
- Cutting width: 15 foot
Just in. Right off the farm. Cutting width: 15 ft
$12,000 USD
Get financing
Est. $236/mo
Gary, SD
Trusted Seller
1988 JOHN DEERE 444
- Manufacturer: John Deere
- Model: 444
- no. of rows: 6 rows
Number of rows: 6 | Rolls: Standard
$3,000 USD
Gary, SD
Trusted Seller
2021 JOHN DEERE C16R
- Manufacturer: John Deere
- Model: C16R
- no. of rows: 16 rows
- Row spacing: 30 in
Just in. Local trade. Opposing Knife Rolls. Number of rows: 16 | Row spacing: 30 in | Chopping capabillity: Non Chopping | Auto contour: Yes | Auto height control: Yes | Auto row sensor: Yes | Telescoping drive: ...
$120,000 USD
Get financing
Est. $2,258/mo
Gary, SD
Trusted Seller
2023 JOHN DEERE C16F
- Manufacturer: John Deere
- Model: C16F
- no. of rows: 16 rows
- Row spacing: 30 in
Stalk stompers: Yes | Number of stalk stompers: 16 | End row augers: Yes | Outer side shield: Yes | Number of rows: 16 | Row spacing: 30 in | Folding: Yes | Chopping capabillity: Chopping | Auto contour: Yes | A...
$157,500 USD
Get financing
Est. $2,964/mo
Gary, SD
Trusted Seller
2023 AWS 40' Air Reel Mounting For MacDon FD240
- Manufacturer: MacDon
- Model: FD40
- Cutting width: 40.0262467191601 foot
This AWS Air Reel was used on a MacDon FD240. Was only used for a few hundred acres. Has everything you need for mounting including fan, hardware, tubing, belts etc. Close to half price of a new one. Shipping an...
$9,235 USD
Get financing
Est. $181/mo
New Tecumseth, Canada
Trusted Seller
2018 JOHN DEERE 716C
- Manufacturer: John Deere
- Model: 716C
- no. of rows: 16 rows
- Row spacing: 30 in
Feederhouse modified to fit an X9. Number of rows: 16 | Row spacing: 30 in | Chopping capabillity: Chopping | Auto row sensor: Yes | Rolls: Knife
$53,000 USD
Get financing
Est. $997/mo
Gary, SD
Trusted Seller
2010 JOHN DEERE 608C
- Manufacturer: John Deere
- Model: 608C
- no. of rows: 8 rows
- Row spacing: 40 in
2010 608C Stalkmaster Corn Head. Less than 1500 acres on stalk roll rebuilds. Good deck plates. Row Sense.
$21,500 USD
Get financing
Est. $405/mo
Gary, SD
Trusted Seller
SOLD! 2011 John Deere 608C Stalkmaster, Hyd. Deck Plate, HHS, Field Ready
- Manufacturer: John Deere
- Model: 608C
- no. of rows: 8 rows
- Row spacing: 40 in
John Deere 608C Stalkmaster - New B&R Feed Rollers - New Bearings in Bottom End - New Blades and Bushings - Single Point Hook Up - Lankota Stalk Stompers - Header Height Sensor's - Hydraulic Deck Plates A...
$32,144 USD
Get financing
Est. $605/mo
Minesing, Canada
Trusted Seller
Auction
New Holland 16HS
- Manufacturer: New Holland
- Model: HS16
- Cutting width: 16.24015748031496 foot
- Auger Diameter: 20 inch
New Holland 16HS swather / windrower Serial: Y7B666971 Features PTO: 1000 Hydraulic PTO pump Center pivot Head Width: 16' Reel: Finger Conditioners: Rubber/ rubber Tires Size: 31x13.50-15 Notes Swing cylinder leaks
$725 USD
Ellinwood, KS
Visit Auction Website
2017 JOHN DEERE 608
- Manufacturer: John Deere
- Model: 608
- no. of rows: 8 rows
- Row spacing: 30 in
2017 608C Stalkmaster corn head... 8 x 30"... It has about 3,000 acres...row sense feelers, always inside.
$55,500 USD
Get financing
Est. $1,045/mo
Pierz, MN
Trusted Seller
Case 1020 25ft Draper Head
- Manufacturer: Case IH
- Model: 1020
- Cutting width: 30 foot
Case IH 1020 Draper Head. 25 ft cutting width. Flexible cutterbar for close ground cutting. Hydraulic fore-aft adjustment and header height control. Poly skids and crop dividers. Designed for Case IH combines. Sh...
Hoisington, KS
John Deere 630F
- Manufacturer: John Deere
- Model: 630F
Neptune Beach, FL
John Deere 635FD Harvester Header
- Manufacturer: John Deere
- Model: 635FD
Good condition John Deere 635FD Harvester Headers available between 2011 and 2019 years. Located in USA and other countries. Click request price for more information.
USA