Used Centrifugal Separators in Denmark

LUWESTA counter-current extractor unit, type EG 2006

• Manufacturer: Unknown

SWPX 810 SGV-34 clarifier

• Manufacturer: Alfa-Laval

One AS-NEW Alfa Laval separator, type SWPX 810SGV-34 clarifier. The unit comes with manual and set of bowl tools. Max. hydraulic capacity: 17.000 liter/hour. Feed temperature, min./max: 0/100 deg. C. Discharge vo...

1985 Alfa Laval AFPX 409BGV-14 purifier unit

• Manufacturer: Alfa-Laval
• Model: AFPX

Reconditioned Alfa Laval 3-phase centrifuge for animal fats and fish oil purification. Includes manual and set of tools. Capacity, AFPX 409BGV-14 purifier - up to 3.500 l/hour. Motor: Exx - 18,5 kW, 50 Hz, 400 V

1974 Alfa-Laval FMAPX 309-BGV-14 fish oil purifier

• Manufacturer: Alfa-Laval

Used Alfa Laval 3-phase centrifuge for animal fats and fish oil purification. Includes manual and set of tools. Capacity, FMAPX309BGV-14 purifier: 1.500 – 3.500 l/hour. Motor: 11 kW, 50 Hz, 400 V

1982 GEA Westfalia MSA 90-01-076

• Manufacturer: GEA
• Model: MSA 90-01-076

Milk separator - 3 phase cream separator. Including original electric panel and manual. Motor: 18,5 kW, 50 Hz, 220/380 Volt, 1465 rpm, IP 55 Capacity: 15.000 l/hour.

1996 Alfa-Laval WSB 103 B-74

• Manufacturer: Alfa-Laval

3-phase separator designed for separating sediments and tramp oil from wash water bath.

Alfa-Laval MRPX 314 HGV-74

• Manufacturer: Alfa-Laval
• Model: MRPX 314

Recondition 3-phase Alfa Laval milk separator, type MRPX 314HGV-74 - for separation of cream and particles from milk. Including sludge cyclone, set of tools and manual. Capacity: 12.500 l/hour Motor: 15 kW, 50 ...

Alfa-Laval CHPX 407SGP-34

• Manufacturer: Alfa-Laval
• Model: CHPX 407

For food, beverage and chemical applications. All parts in contact with products are in stainless steel. This separator is in excellent condition and ready to be put in operation. Hydraulic capacity (pure water) ...

1998 Alfa-Laval IFB303X-73

• Manufacturer: Alfa-Laval

This Alfa Laval IFB303X-73 separator module is designed for the separation of tramp oil from cutting fluid - thereby prolonging the lifetime of the cutting fluid in the machine industry.

1966 GEA Westfalia SAMN 15007

• Manufacturer: GEA

Complete Westfalia separator, type SAMN 15007 in purifier configuration. Amount of discs: 152. Motor: 25 kW AEG, 2940 rpm, 47 Amp., 50 Hz, 380 V, 3 phase, IP 33 This unit is in excellent working condition and w...

Alfa-Laval NX 309S-31B

• Manufacturer: Alfa-Laval
• Model: NX

Small Alfa Laval decanter unit in excellent condition. Fixed back drive unit. Max. bowl speed: 5600 rpm. Drum diameter: 230 mm. Max solids density: 2,1 g/cm3 This unit has been used in a pilot plant - only very ...

PIERALISI ESTRATTORE CENTRIFUGO HERCULES 470/3

• Manufacturer: Pieralisi

Pieralisi sludge dewatering equipment for dewatering of municipal biological sludge in excellent condition. This decanter unit is also normally used in industrial applications. Capacity around 25.000 liters of sl...

Alfa-Laval NX314B-31 decanter bowl

• Manufacturer: Alfa-Laval
• Model: NX-314

Bowl for NX314B-31G decanter in good condition. 2 rows for sludge outlet. Bowl with strips. Big- and small end with bearing housings, gearbox, motor etc. is also available.

Alfa Laval FPNX 418B-31 - decanter unit

• Manufacturer: Alfa-Laval

Alfa Laval decanter unit, type FPNX 418B-31G. Spec. no.: 8820.5000-31. Drum diameter: 190/353 mm. Max sludge density: 3,4 kg/dm3. Max drum speed: 3250 rpm. Pitch: 110 mm. Converyor with "Esbjerg" feed zone desig...

FPNX 728B-11G tricanter unit

• Manufacturer: Alfa-Laval

This reconditioned 3-phase Alfa Laval decanter unit, type FPNX 728B-11G with fixed back drive system - is in an overall excellent condition. Drum and conveyor are manufactured in acidproof stainless steel. Produ...

Alfa-Laval AFPX-313 Centrifugal Separator

• Manufacturer: Alfa-Laval
• Model: AFPX-313

Good condition Alfa-Laval AFPX-313 Centrifugal Separators. Located in Denmark and other countries. Click request price for more information.