Used Material Handling

Trusted Seller
UNA-DYN 82894.06 Loader Used
- Manufacturer: Una-Dyn
82894.06 LID AND FILTER INCLUDED OD: 10" ID: 8 3/4" Outlet 1: 1 1/2" Bottom outlet: 2 1/2" Flange: 7" x 5 1/2" Bolt Holes, Center-to-Center: 6 1/4" x 4 3/4" Buyers are welcome to inspect equipment prior t...
$795 USD
Holly, MI
Trusted Seller
Used dry material feeder system
- Manufacturer: Acrison
Used dry material feeder system consisting of a super-sak unloading platform mounted above a small stainless steel vibrating hopper equipped with stainless steel knife valve that discharges to small diameter incl...
Charlotte, NC
Trusted Seller
AMI Spring Loaded Industrial Pallet Load Leveler 3500lbs 42x46" Swivel Top
- Manufacturer: AMI
Used, in Good Working Condition. Removed From a Working Environment. Not sure what weight the springs are set at. Swivel top 42x46". 30" high with no load. If this item ships as Flat Rate Freight please see detai...
$926 USD
Millersburg, IN
Trusted Seller
Rite Hite 863.100 CBSHR5 Dock Lock Control Box 115VAC Doc-lok CB P1
- Manufacturer: Rite Hite
New in Original Manufacturer's Packaging. For Red and green indicator light for semi docks. Safety control panel If this item ships as Flat Rate Freight please see details in Shipping tab
$1,150 USD
Millersburg, IN
Trusted Seller
Rite Hite Dok Guardian Retractable Dock Safety Barrier Stops 30000lbs
- Manufacturer: Rite Hite
Used, in Good Working Condition. Removed From a Working Environment. This is an OHSA safety stop for truck dock. Would stop up to 30000 lbs. A 10000 lb forklift going at 4 miles per hour. Looks to be complete wit...
$850 USD
Millersburg, IN
Trusted Seller
AMI Spring Loaded Industrial Pallet Load Leveler 3500lbs 42x46" Swivel Top
- Manufacturer: AMI
Used, in Good Working Condition. Removed From a Working Environment. Not sure what weight the springs are set at. Swivel top 42x46". 30" high with no load. If this item ships as Flat Rate Freight please see detai...
$926 USD
Millersburg, IN
Trusted Seller
CONAIR FRANKLIN Tilt Table Used
- Manufacturer: Conair
Tipper / Tilt Table Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Loc...
$1,295 USD
Holly, MI
Trusted Seller
AEC WHITLOCK Vacuum Loader SLC04 USED
- Manufacturer: AEC
115 Volt Single Phase 60 Hz Motor: 1.5 HP, 11 Amp 115 Volt Control Circuit Tested Good Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. Th...
$895 USD
Holly, MI
Trusted Seller
BUNTING MAGNETICS 81937 Drawer Magnet USED
- Manufacturer: Bunting
56.75 mm Diameter Inlet / Outlet Top Flange Approx. 7" x 7" Top Flange 50.67 mm Diameter Inlet / Outlet Bottom Flange Approx. 1.25" Cone Height 1.25" Cylinder Height Expedited shipping services are available...
$399 USD
Holly, MI
Trusted Seller
EMI METAL FABRICATING Drawer Magnet USED
- Manufacturer: EMI
50.58 mm Diameter Inlet / Outlet Top Flange Approx. 7" x 7" Top Flange 7" x 7" Bottom Flange 5.5" x 5.5" Center to Center Holes Bottom Flange Approx. 69.71 mm Diameter Inlet / Outlet Bottom Flange Approx. Ex...
$399 USD
Holly, MI
Trusted Seller
PPE Drawer Magnet USED
- Manufacturer: PPE
2" x 2" Inlet / Outlet Top 4.5" x 4.5" Top Flange 3" Bottom Cone Height 4.5" x 4.5" Bottom Flange 3" x 3.5" Center to Center Holes Bottom Flange 2" x 2" Bottom Inlet / Outlet Expedited shipping services are...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
49.80 mm Diameter Top Flange Inlet / Outlet 6" x 6" Top Flange 5" x 5" Center to Center Holes Top Flange 7.5" Cylinder Height 1.25" Cone Height 1.25" Bottom Cylinder Height Expedited shipping services are a...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
6.5" x 6.5" Top Flange 3" Diameter Inlet / Outlet Top Flange Approx. 3.25" Cone Height 6.5" x 6.5" Bottom Flange 5.5" x 5.25" Center to Center Holes Bottom Flange Approx. 3" Diameter Inlet / Outlet Bottom Fl...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
7" x 7.25" Top Flange 76.71 mm Diameter Top Inlet / Outlet 2" Cone Height 1" Cylinder Height 7" x 7" Bottom Flange 5" x 5.75" Center to Center Holes Bottom Flange 51.75 mm Diameter Inlet / Outlet Bottom Fla...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
3" x 3" Top Inlet / Outlet 6.5" x 6.5" Top Flange 5.25" x 3" Center to Center Holes Top Flange Approx. 3.25" Cone Height 6.5" x 6.5" Bottom Flange 3" x 5" Center to Center Holes Bottom Flange 3" X 3" Bottom...
$399 USD
Holly, MI
MB Crusher MB-G1000 S4 Material Handling Attachment
- Manufacturer: MB Crusher
- Model: MB-G1000 S4
Good condition MB Crusher MB-G1000 S4 Material Handling Attachments manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA