Used Machine Tools

2000 PSI CHIPBLASTER "EV2000RI" HIGH PRESSURE HIGH VOLUME COOLANT SYSTEM

• Manufacturer: ChipBlaster

2000 PSI CHIPBLASTER "EV2000RI" HIGH-PRESURE HIGH-VOLUME COOLANT SYSTEM - 13 GPM - 50 gallon capacity - 10 HP 2000 PSI CHIPBLASTER HI-PRESSURE COOLANT SYSTEM Serial No 1810, Model EV2000RI EQUIPPED WITH: Inlet, O...

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26785 ALSO.

58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS

58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...

2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS

• Manufacturer: Spego

2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...

Sandvik Coromant A260-425M-1 Face Mill Auto Support Body Tool Holder

• Manufacturer: Sandvik

New surplus. If this item ships as Flat Rate Freight please see details in Shipping tab

Niagara Ring And Circle Shear Z20058A

• Manufacturer: Niagara
• Model: 13RC

3 1/2" - 44" Circle Diameter Range 1 5/8" Diameter Of Cutters 34 1/2" Tail Stock Depth 9.25" Head Throat depth Capacity 16 Gauge mild Steel 1/2HP Motor Foot Pedal Control

Sharp Precision Tool 50" X 9" Table Vertical Mill

• Manufacturer: Sharp Precision

Fagor Name: Vertical Mill | Arrival date: 10-13-2025 | Dimensions l x w x h (inches): 68 x 57 x 87 | Capacity: 50" X 9" TABLE | Electrical: 3/60/220/440 | Weight (lb.): 2180 | Available quantity: 1 | Make year: 2...

HORIZON INTERNATIONAL PERFECT BOOK BINDER MACHINE ON 3" CASTERS

• Manufacturer: Horizon

H.D COMMERCIAL PERFECT BOOK BINDER MACHINE ON 3" CASTERS MAKE- HORIZON INTERNATIONAL MODEL#- BQ-140 SN- 136003 MADE IN JAPAN ELECTRICAL INFORMATION 120V,1PH, 6 AMP, 60HZ REGULAR PLUG APPROXIMATELY DIMENSIONS 41 1...

MIGHTY LUBE MODEL 7165F SYSTEMATIC LUBRICATION MACHINE WITH LUBECON CONTROLLER

• Manufacturer: MIGHTY LUBE

MIGHTY LUBE MODEL 7165F SYSTEMATIC LUBRICATION MACHINE WITH LUBECON CONTROLLER MAKE- MIGHTY LUBE MODEL#- 7165 F SN- F7LO65X1-03-13326 ELECTRICAL INFORMATION 115/230 V,1PH, 6/3 AMP, 60HZ, .33 HP REGULAR PLUG APPRO...

60" X 32" X 5" DEVLIEG JIGMILL "TYPE-E" LAYOUT INDEX TABLE w/ADJUSTING BASE

• Manufacturer: DeVlieg

60" X 32" X 5" DEVLIEG "TYPE E" T-SLOTTED Imperial Metric INDEX/LAYOUT TABLE W/ADJUSTING BASE Serial No 11045, Type E EQUIPPED WITH: 36" x 36" x 2" Slotted Base For Adjusting Locating Hole Heavy-Box Section Casti...

(2) 33" X 55" X 36" HEAVY-DUTY GEARED ADJUSTABLE POSITIONING SLOTTED ANGLE PLATES

(2) 33" X 55" X 36" HEAVY-DUTY ADJUSTABLE POSITIONING SLOTTED ANGLE-PLATES Imperial Metric EQUIPPED WITH: MANUAL GEARED ADJUSTABLE POSITIONING (9) VERTICAL MACHINED SLOTS (3) HORIZONTAL MACHINED SLOTS GENERAL SPE...

BULK QTY OF PNEUMATIC & HYDRAULIC CYLINDERS

THIS BULK LOT INCLUDES MULTIPLE SMC PNEUMATICS DOUBLE-ACTING AIR CYLINDERS, AMONG THEM MODEL CDA2L40-400-J59W-111G RATED FOR A MAXIMUM PRESSURE OF 145 PSI (1.0 MPA), MODEL CA2T100TN-300L-XC3DC RATED AT 145 PSI (1...

BULK QTY OF PNEUMATIC & HYDRAULIC CYLINDERS

THIS BULK LOT INCLUDES MULTIPLE SMC PNEUMATICS DOUBLE-ACTING AIR CYLINDERS, AMONG THEM MODEL CDA2L40-400-J59W-111G RATED FOR A MAXIMUM PRESSURE OF 145 PSI (1.0 MPA), MODEL CA2T100TN-300L-XC3DC RATED AT 145 PSI (1...