2005 Buhler SHP · TS · 40
used
- Manufacturer: Bühler
Wetted parts material: SUS Hydraulic drive motor Agitator: High-speed turbine, low-speed 3 open propellers Explosion-proof hydraulic unit
Hiroshima, Japan
Aikosha Manufacturing AM-90
used
- Manufacturer: Aikosha Manufacturing Co.
With ON/OFF switch & timer. Spare blades available.
Hiroshima, Japan
Sugiyama Heavy Industries UA-160S
used
- Manufacturer: Sugiyama Heavy Industries
High-speed mixer Mixing capacity: MAX 1250L, buffed on the inside Motor: Tilting vane 90kw/220V Chopper 30kw/220v Jacket Remarks No control panel, main unit only
Hiroshima, Japan
SUS tank
used
Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
SUS tank
used
Total capacity: approx. 1000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
Hiroshima, Japan
Yamato Seiki 300 liters
used
- Manufacturer: Yamato Seiki
Motor: 11kw Vessel capacity: 300L (Vessel fixed type) Wetted part material: SUS with jacket Vacuum specification Remarks No control panel and vacuum pump. *Exhaust 2500L Large trestle is attached, but it can be r...
Hiroshima, Japan
Mixing machine
used
Reduction ratio 1/240. Power: 0.75Kw4P200V | Purchasing area: 60Hz | Material: SUS | Quantity saved: 1
Hiroshima, Japan
Hiroshima, Japan
1990 Hosokawa Micron DBX-2000R
used
- Manufacturer: Hosokawa Micron
Capacity: 2000L Power: 5.5kw / 0.75kw | Material: Gluing section SUS | Quantity saved: One
Hiroshima, Japan
Hiroshima, Japan
Inoue Manufacturing Cooling
used
- Manufacturer: Inoue Manufactory
Roll diameter: approx. 350φ (137 吋)* actual size measurement Although it is old, it was serviced and used by the manufacturer three times.
Hiroshima, Japan
2001 SMTHE HFM-5 · HFM-10
used
- Manufacturer: SMT
HFM-5 Motor: 1.5kw Throughput: 3-5L/batch Rotation speed: 8000rpm(MAX) HFM-10 Motor: 2.2kw Processing volume: 5-10L/batch Rotation speed: 15000rpm(MAX) φ80 6 blades, sealed jacketed vessel
Hiroshima, Japan
1999 Araki Iron Works RG - 100
used
- Manufacturer: Araki Ironworks
Main unit: Explosion-proof specification Starting board: Non-explosion-proof area Remarks Drawings only available
Hiroshima, Japan
SUS tank
used
Total capacity: approx. 3000L. *Some accurate capacity requires actual size measurement due to lack of data. Equipped with an agitator (eG3).
Hiroshima, Japan
Tip: Enter manufacturer, model or keyword