Used Materials Testing in Belgium

2015 Cutter for test samples STRUERS

• Manufacturer: Struers
• Model: Discotom-10

Dimensions: width 1050mm, depth 940mm, height 680mm (lever 860mm) For cutting discs Ø 230 x 2mm, bore Ø 32mm With pneumatically activated plexiglas protection cover With original metal underbench STRUERS With wat...

Mobile Hardnesstester for Interiors/ borings EMCO-TEST ROCKWEL

• Manufacturer: Emco

Dimensions: Lenght: 550mm; Witdh: 140mm; Height: 90mm manual indication load level 625HRC The reading after measure is taken from dial gauge in HRC With Diamant and spring joint

Tensile testing machine MOHR&FERDERHOFF 20t

• Manufacturer: Mohr

Brand: Type: UPD20 Traction machine dimensions: length: 1100mm; width: 1300mm; height: 2500mm Hydraulic dimensions: length: 700, width: 800mm; height: 1800mm With 2 chuck and sample boxes With extensometer With h...

1968 Tensile testing machine WOLPERT W30, 30 t

With hydraulic unit Useful dimensions (hydraulic block): 1120 mm x 720 mm, h. 1660 mm Older version, in very good condition Without sample clamping system

Sand strength testing device GF, type SPDR

With mâchoires de pression Weight: ± 20 kg

Hardness tester FIE RA ROCKWELL

• Manufacturer: Rockwell

For ROCKWELL tests with diamant cone 120 ° Weight: ± 110mm | Dimensions: length 500mm, width 260mm, height 650/1430mm | Ø table: 50mm | Dimensions table: 610mm x 500mm | Support plate: Ø 50mm | Useful height: 216...

1965 Hardness tester WOLPERT, HT 2 S

Serial number: 4898Construction year: 1965Weight: ± 350 kgDimensions: 740 mm x 500 mm x 1560 mm , (feet 350 mm)With ball 3 mmPression: 250 kgFor ROCKWELL test according to DIN 51304With 3 interchangeable table to...

Wet strength tester for clay bonded sand GF

• Manufacturer: GF

For determining the water resistance of clay-bound sand up to 0.6 N/cm² With heating up to 300 °C With sleeve, ring and base

Sand strength tester GF

• Manufacturer: G+F

Brand G+F With 1 set of pression jaws Weight: ± 20 kg | Dimensions: length 630 mm, width 210 mm, height 220 mm

Hardness tester by impact POLDI

With optics and calibre in box Weight: ± 1 kg

Hardness tester ERNST, ball Ø 2,5mm, electronic

• Manufacturer: Ernst

Electronic display, 16 Bit Height adjustment by hand crank Semi-automatic unit for BRINELL, ROCKWELL and VICKERS Can be connected to computer or printer Prints posisble in 5 languages

Sand strength tester GF SPDR

• Manufacturer: G+F

Brand G+F With 1 set of pression jaws Weight: ± 20 kg | Dimensions: length 630 mm, width 210 mm, height 220 mm

Samples polishing unit BUEHLER

• Manufacturer: Buehler
• Model: Minimet

With speed regulator and timer Weight: ± 15 kg | Outside dimensions: 450mm x 180mm, h. 180mm | Motor: 220V (mono)

Hardness tester WOLPERT/TESTWELL Ø 10 mm, 3000 kg

Type: DIA TESTOR 3B, serial number: 2574 Motor KOBOLD, type: KOD646/ma/517 W, serial number: 2076595, 0,55 kW, 1400 rpm, 220/380 V Table Ø 240 mm, adjustable by motor and hand Ball Ø mm pressure 3000 kg Old type,...

Samples polishing equipment STRUERS Abraplan

• Manufacturer: Struers

Type: 260-M-916R, serial number: 2600456 Year of construction: 2006, weight: ± 280kg 2 motors SEW, 3x 380 V, 50 Hz. The polishing machine is especially designed for metal specimens mounted in a specimen holder di...