Used Kalmar Forklifts

Trusted Seller
10,000 Kalmer AC LP Lift Truck
- used
- Manufacturer: Kalmar
Fork length: 48" | Max lift height: 155" | Machine capacity: 10,000 lbs.
Detroit, MI
2019 KALMAR DCG90-45ES
- used
- Manufacturer: Kalmar
Capacity: 19845 lbs. | Tire: PNEUMATIC - AIR | Fuel: DIESEL | Lowered height: 396" | Raised height: 740" | Carriage class: OTHER | Voltage: 12 VOLT
Twinsburg, OH
2019 KALMAR DCG90-45ES
- used
- Manufacturer: Kalmar
Capacity: 19845 lbs. | Tire: PNEUMATIC - AIR | Fuel: DIESEL | Lowered height: 396" | Raised height: 740" | Carriage class: PIN TYPE | Voltage: 12 VOLT
Twinsburg, OH
Trusted Seller
2019 Kalmar DCF450-12
- used
- Manufacturer: Kalmar
- Model: DCF450-12
Engine: Volvo 6 cylinder turbocharged diesel Tier 4 compliant model TAD1250VE Transmission is a 4 speed fwd and rev – Dana TE32000 Planetary differential with wet disc brakes Fully enclosed cab with heater, wiper...
Coraopolis, PA
Trusted Seller
2006 Kalmar DCE160-9
- used
- Manufacturer: Kalmar
- Model: DCE 160
Powered by: Diesel | Chassis type: Pneumatic tire | Transmission: 3 speed powershift | Differential: Heavy duty planetary | Service brakes: Wet disc | Mast type: 2-Stage | Mast lowered height: 160.00 " | Mast ma...
Coraopolis, PA
Trusted Seller
2012 Kalmar DCD250-12
- used
- Manufacturer: Kalmar
- Model: DCD 250-12
Powered by: Diesel | Chassis type: Pneumatic tire | Engine description: Cummins QSB6.7 Turbocharged Tier 3 | Transmission: 3 speed powershift | Differential: Planetary | Service brakes: Wet disc | Mast type: 2-S...
Coraopolis, PA
Trusted Seller
2005 Kalmar C80CXC
- used
- Manufacturer: Kalmar
$9,000 USD
Get financing
Est. $177/mo
Marshall, IN
Trusted Seller
2008 Kalmar DCD250-12 On RENT
- used
- Manufacturer: Kalmar
- Model: DCD 250-12
Powered by: Diesel | Chassis type: Pneumatic tire | Engine description: Cummins tier 3 turbocharged diesel | Transmission: 3 speed powershift | Differential: Heavy duty planetary | Service brakes: Wet disc | Mas...
Coraopolis, PA
Trusted Seller
2013 Kalmar DCD250-12 FOR RENT ONLY
- used
- Manufacturer: Kalmar
- Model: DCD 250-12
Powered by: Diesel | Chassis type: Pneumatic tire | Engine description: Cummins Turbo diesel | Transmission: 3 speed powershift | Service brakes: enclosed wet disc | Mast type: 2-Stage | Additional mast descript...
Coraopolis, PA
2016 Kalmar DCG150-6
- used
- Manufacturer: Kalmar
- Model: DCG150-6
JUST IN A VERY NICE 33,000LB KALMAR FULLY LOADED WITH FULL CAB , HEAT AND AC , 187" OF LIFT WITH SIDE SHIFT AND FORK POSITIONER , 4' FORKS , UNIT HAS NOT BEEN CLEANED , GREAT ORIGINAL PAINT , RUNS GREAT , PRICED...
Burlington, NC
2013 Kalmar DCE160-12
- used
- Manufacturer: Kalmar
- Model: DCE 160-12
FULLY LOADED 36,000LB KALMAR RATED AT 48" LOAD CENTER , FULL CAB WITH HEAT AND AC , MAST IS 185" DOWN AND 236" RAISED WITH SIDE SHIFT AND INDEPENDENT FORK POSITIONER , GREAT 8' FORKS , VERY GOOD TIRES , PRICED TO...
Burlington, NC
Trusted Seller
2018 Kalmar DCG-250 146035
- used
- Manufacturer: Kalmar
Bristol, PA
2016 Kalmar DCG 140-600 BIG WHEEL
- used
- Manufacturer: Kalmar
- Lifting Capacity: 30,865 lbs
30,000LB big wheel Kalmar , 2- new drive tires installed , full cab with heat and ac , 187" total lift with side shift and fork positioner , 60" forks , new forks are available , unit will be cleaned and servic...
Burlington, NC
2000 Kalmar DCD80-45E7
- used
- Manufacturer: Kalmar
- Model: DCD 80
General Details 6-hi Stack Kalmar Empty handler, Approximately 12,000 Hours Well-Maintained Machine – 14,370 Hours
Wilmington, NC
Trusted Seller
2012 KALMAR DCD250-12LB
- used
- Manufacturer: Kalmar
- Model: DCD 250-12
DIESEL, AUTO, S/S, F/P, CAB, A/C, 96" FORKS - 154/157" FFL - FOR RENT ONLY
Jordan, MN
Kalmar P100CXD Forklift
- used
- Manufacturer: Kalmar
- Model: P100CXD
Good condition Kalmar P100CXD Forklifts manufactured in 2004. Located in USA and other countries. Click request price for more information.
USA