New Processing in New Jersey, USA

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216127

• Manufacturer: Graham

Flash condenser for a column condenser (IPP # 216020) Duty: 2,957,440 BTU/hr.

Plate and Frame Heat Exchanger 182.8 m² (1,968 ft²) Hastelloy - - IPP# 216154

spare plate pack for Heat exchanger IPP # 216118 ( EQ 4161) 59 plates at 33.36 sq.ft. per plate

Plate and Frame Heat Exchanger 259.2 m² (2,790 ft²) Stainless Steel 316 - IPP# 214853

• Manufacturer: Alfa Laval

CRN L-4646.57 frame plates are SA-516-70 CS With (418) channel plates print weight is 6247 lbs

Stainless Steel 316 Stalwart international BPEFP Pressure Leaf Filter - IPP# 222032

• Manufacturer: International

vertical sparkler type filter cGMP rated and sanitary construction buff polished to a mirror finish Rated for 3.5 kg/cm2 With a cake holding capacity of 64 Liters 18" x 15. (15 plates) Main filter body bolts toge...

Stainless Steel 304 Chemap A10 Pressure Leaf Filter - IPP# 89349

• Manufacturer: Chemap

Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge

Pan Filter 1.11 m² (12 ft²) Stainless Steel 316 - IPP# 31299

• Manufacturer: Filter-1

tipping vacuum pan filter Completely enclosed in 316 stainless steel housing Discharge is through cone 18" diameter.

Carbon Steel Cartridge And Candle Filter - IPP# 206740

• Manufacturer: Crall Products

cartridge filter MDMT is 0 degrees F at 150 psi Inlet and outlet piping is 3" weld neck flange Filter has swing arm for removing the head. Shell thickness is .250" Head Thickness is .250" Hydro Test to 195 psi. E...

Air Filter Stainless Steel 304 - IPP# 235284

• Manufacturer: Camfill

Bag in/bag out filter housing Silicone liquid sealing on doors Tested to ASME N510-1995 Prefilter part # 30/30,24" X 24" X 2" Change out bag # 64C X 72 /3G Final filter part # FA 1570A-01-01-08/09 Change out bag ...

Wiped/Thin Film Evaporator - IPP# 82182

• Manufacturer: Luwa SMS

6-blade Luwa evaporator rotor only.

Luwa SMS Wiped/Thin Film Evaporator - IPP# 82183

• Manufacturer: Luwa

6-blade Luwa evaporator rotor only.

Carbon Steel Bepex TD48-9 Dryer-Thermal Disc - IPP# 225385

• Manufacturer: Bepex

Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2300. Shell rated 15 psi @ 350 degrees. No jacket on trough. U shaped trough, bol...

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 225384

• Manufacturer: Bepex

Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2299. Working pressure in the hollow rotor is 100 PSI @ + 50 to 350 degrees F She...

Carbon Steel Dryer- Ribbon & Paddle - IPP# 96807

• Manufacturer: Bepex

Bepex Continuator 214 Square foot heating surface. with a dome top cover, 159.5 overall all height. 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. o...

Dryer-Drum 762 mm (30 in) Stainless Steel 316 - IPP# 71315

single drum dryer Drum driven by 12 KW motor and reducer Cored drum Packing gland on shaft Outboard bearings Dual knife discharge, manual knife adjustment into 8" dia screw conveyor

Dryer-Drum 914.4 mm (36 in) Carbon Steel - IPP# 79738

drum for dryer Blt for working pressure of 10 bars