Used Tanks & Kettles in Bremen, Germany

25000 liter ISO tank container / heat-/coolable pressure tank, Aisi 316

• Manufacturer: Van Hool

max. allowable working overpressure (dj): 3.0 bar remarks: Material in contact with product: 1.4402 (Aisi 316L); Frame, Fe (painted); technical description available; diameter manhole 500 mm; the complete technic...

9000 liter coolable pressure tank / sterile tank, Aisi 304

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 145 °C Temperature control cylinder (dj): double jacket Technical documentation: drawing,German Technical Supervisory Association TÜV documents,CE label and declaration of conf...

25000 Liter 22T6 ISO-tank container / heatable pressure tank, Stainless steel

max. allowable working temperature: 120 °C remarks: Includes modular heating system; can be cleaned from the inside for an additional charge

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

2550 liter tank, SST

remarks: material: 1.4605; foot frame, Fe; rectangular opening appr. 400 x 400 mm (frame of the cover made of Fe)

3000 liter tank, Aisi 304

• Manufacturer: ALFA-LAVAL

remarks: Manhole approx. 400 x 510 mm; 2 pipes inside the tank

6000 liter tank, Aisi 304

remarks: manhole diameter appr. 470 mm in the upper bottom; rungs inside the tank (see pictures)

2645 liter tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 340 x 440 in the front bottom; Test pressure according to the nameplate 2 bar

630 liter tank, AISI 316

notice: some residues of previous content, manhole cover plated

3500 liter tank, Aisi 304

remarks: Diameter manhole appr. 455 mm; smaller dents in the inner cylinder; insulation cover of the lower bottom by plate of mild steel; tank 7061-2 with dents in the insulation jacket and an outlet DN 65 11851

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

8000 liter tank, Aisi 304

remarks: pipelines inside the tanks; in the case of one tank the outlet is cut off; the other tank was re-welded in several places on the central cylinder weld

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

500 liter tank, Aisi 304

remarks: Slight differences in the design of the tanks; tanks slightly out of round and with smaller dents; tanks do not have a bottom outlet; Feet partly slightly bent; One of the lids has 1 round sheet metal cu...

500 liter tank, Aisi 304

remarks: Tank slightly out of round; Parts of the butterfly valve are lower than the lower bottom (take this into account when setting up the tank); outlet slightly curved upwards; Tank with dents in the transiti...