Processing » Injection Molding » Hydraulic Injection Molding » Germany

Search By Manufacturer

Search By State

Building Filters

46

Used Hydraulic Injection Molding in Germany

  • Trusted Seller
    2007 Arburg 420A 1000-400

    2007 Arburg 420A 1000-400

    • Manufacturer: Arburg

    This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clam...

    Germany
  • Trusted Seller
    2019 Engel Duo 740 H

    2019 Engel Duo 740 H / 740 M / 500 WPX combi M

    • Manufacturer: Engel

    This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy c...

    Germany
  • Trusted Seller
    2018 HAITIAN JU13000/IIH

    2018 HAITIAN JU13000/IIH

    • Manufacturer: HAITIAN

    This HAITIAN JU13000/IIH was manufactured in 2018. It features a robust hydraulic injection moulding system with a screw diameter of Ø 110 mm and an injection unit of 8400. Powered by AC 400 V, 3-phase + N, 50 Hz...

    Germany
  • Trusted Seller
    2012 SUMITOMO SHI DEMAG El-Exis

    2012 SUMITOMO SHI DEMAG El-Exis S250/630-1600

    • Manufacturer: Demag

    This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of ...

    Germany
  • Trusted Seller
    2016 HAITIAN JU9000II/6800 PLUS

    2016 HAITIAN JU9000II/6800 PLUS

    • Manufacturer: HAITIAN

    This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It features a clamping force of 9000 kN and an injection unit with a capacity of 2362 cm³. Operating on a 400 V / 50 Hz power supply, it consumes 199 kW a...

    Germany
  • Trusted Seller
    2004 Arburg 720 S 3200

    2004 Arburg 720 S 3200 -1300

    • Manufacturer: Arburg

    This Arburg 720 S 3200 -1300 was manufactured in 2004. A hydraulic injection moulding machine featuring an operating voltage of 400 V, control voltage of 24 V, and a total connected load of approximately 39.0 kW....

    Germany
  • Trusted Seller
    2004 Arburg Allrounder Selecta 720

    2004 Arburg Allrounder Selecta 720 S 3200-2100

    • Manufacturer: Arburg
    • Model: Allrounder 720

    This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a m...

    Germany
  • Trusted Seller
    2015 SUMITOMO SHI DEMAG Systec

    2015 SUMITOMO SHI DEMAG Systec SP 350/720-840

    • Manufacturer: Demag

    This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMA...

    Germany
  • Trusted Seller
    2002 Krauss Maffei 150-520 C2

    2002 Krauss Maffei 150-520 C2

    • Manufacturer: Krauss-Maffei
    • Model: 150-520 C2

    This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hour...

    Germany
  • Trusted Seller
    2005 SUMITOMO SHI DEMAG El-Exis

    2005 SUMITOMO SHI DEMAG El-Exis S 250/630-1450

    • Manufacturer: Demag

    This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 4...

    Germany
  • Trusted Seller
    2021 Netstal Elion 800-270

    2021 Netstal Elion 800-270

    • Manufacturer: Netstal

    This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integr...

    Germany
  • Trusted Seller
    2016 HAITIAN MA900 II eco

    2016 HAITIAN MA900 II eco

    • Manufacturer: HAITIAN

    This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II ...

    Germany
  • Trusted Seller
    2004 Engel Duo 11050/1100 WP

    2004 Engel Duo 11050/1100 WP

    • Manufacturer: Engel

    This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injecti...

    Germany
  • Trusted Seller
    2018 HAITIAN JU12000III

    2018 HAITIAN JU12000III

    • Manufacturer: HAITIAN

    This HAITIAN JU12000III was manufactured in 2018. A robust hydraulic injection moulding machine, it features a power supply of AC 400 V, 3-phase + N + PE, 50 Hz, and an input power of 148 kW. Rated current stands...

    Germany
  • Trusted Seller
    2010 Arburg 470 S 800-170

    2010 Arburg 470 S 800-170

    • Manufacturer: Arburg

    This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connec...

    Germany
1234

Overview

Hydraulic injection molding machines use hydraulic systems to inject molten plastic into molds. They deliver high clamping force and are well suited for large, thick-walled, or high-volume parts where brute force and durability matter. Key specs include clamping tonnage, shot size, injection pressure, screw diameter and control type. Used hydraulic machines can offer strong value but require careful inspection of hydraulics, seals, screws, and controls.

FAQ

What should I check when buying a used hydraulic injection molding machine?

Review maintenance records, cycle count, condition of hydraulics (leaks, pumps, valves), screw and barrel wear, platen and tie-bar alignment, control panel and wiring, and spare-parts availability. Ask for operational videos or a trial run.

How do I arrange safe shipping for a hydraulic injection molding machine?

Drain hydraulic and cooling fluids, secure moving parts, protect electronics, and use a heavy-equipment transporter with cranes or forklifts. Provide exact weight and dimensions, insure the shipment, and check permits for oversized loads.

What regular maintenance keeps a hydraulic injection molder reliable?

Daily checks: hydraulic oil level, leaks, heater function and temperature stability. Weekly/monthly: change filters, inspect hoses and seals, grease points, and test safety interlocks. Periodically perform oil analysis, screw/barrel inspection, and control calibration per manufacturer guidelines.