Processing » Blowers » Regenerative Blowers » Saxony

Search By Manufacturer

Building Filters

4

Used Regenerative Blowers in Saxony, Germany

  • Trusted Seller
    Side channel blower 0.43 kW

    Side channel blower 0.43 kW

      2-branch design Frequency 50/60 Hz Unused !!! Pmax: 180 mbar | Engine: Siemens | Power: 0.43 kW | Voltage: 230 /400V | Protection: IP54

      $377 USD
      Zschepplin, Germany
    • Trusted Seller
      Side channel blower 1.5 kw

      Side channel blower 1.5 kw

        Side Channel Blower, Side Channel Blower 28H4 110-OHC 32 50 Hz 1.5 KW 3x 240/400 V IP54 Unused !!!

        $406 USD
        Zschepplin, Germany
      • Trusted Seller
        Side channel blower 18.5 kW,

        Side channel blower 18.5 kW, 625 mbar #B17758

          Side Channel Blower Effepizeta SCL K09-TD, 18.5 kW, 400/690 V, 50 Hz, 2900 rpm. Robust, low-maintenance industrial unit for pressure and vacuum applications in a wide range of industries. Side Channel Blower Effe...

          Riesa, Germany
        • Trusted Seller
          Siemens ELMO-G 2BH1400-7AH06

          Siemens ELMO-G 2BH1400-7AH06

          • Manufacturer: Siemens
          • Model: Elmo-G

          Pressure +/- 120 mbar side channel compressor vacuum pump Siemens ELMO-G 2BH1400 700W used 200-240/345-415 V; 4,25/2,45 A; 50 Hz connections approx. Ø 40/50 mm total approx. 300 x 300 x 330 mm weight approx. 12 k...

          Riesa, Germany

        Overview

        Regenerative blowers are compact, oil-free centrifugal machines that produce continuous airflow and moderate pressure for vacuum and pressure applications. Used in aeration, pneumatic conveying, vacuum holding, drying and packaging, they offer quiet operation, low maintenance and long life. Select by required flow (CFM), pressure/vacuum (inHg or mbar), RPM, inlet/outlet size and motor specs; filtration, silencers and vibration mounts improve performance in dusty or humid environments.

        FAQ

        What should I check when buying a used regenerative blower?

        Confirm model and performance curves match your needs, inspect impeller and housing for wear, check shaft play and bearings, verify motor condition and voltage, ask for run-time hours and service history, and request an operational test if possible.

        How should a regenerative blower be prepared and shipped?

        Secure and crate the blower to prevent movement, protect inlet/outlet flanges, lock or immobilize rotating parts, label fragile electrical components, insure the shipment, and use a carrier experienced with industrial rotating equipment.

        What routine maintenance keeps a regenerative blower reliable?

        Keep inlet filters clean, monitor bearing temperature and vibration, check belts or couplings, inspect seals and mounting hardware, follow manufacturer service intervals for bearings and lubrication, and replace worn parts promptly.