Used Processing in Bremen, Germany

70800 liter storage tank, Aisi 304

• Manufacturer: Gross Apparatebau

remarks: manhole approx. 350 x 450 mm in the front bottom; one tank (9540-1) with a small dent under the wooden cradle, one tank (9540-2) without a nameplate, up to 4 additional identical tanks could be made avai...

570 liter mobile bulk container, Aisi 304

• Manufacturer: UCON

remarks: Mobile frame, Aisi 304 with 4 plastic wheels; Manhole diameter 850 mm with loose cover; slight differences in the design of the containers possible

1000 liter container, Aisi 304

remarks: Aluminum frame (a strut on one container is bent; see photos); 2 of the containers with butterfly taps (not quite complete anymore)

2400 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

25000 liter ISO tank container / heat-/coolable pressure tank, Aisi 316

• Manufacturer: Van Hool

max. allowable working overpressure (dj): 3.0 bar remarks: Material in contact with product: 1.4402 (Aisi 316L); Frame, Fe (painted); technical description available; diameter manhole 500 mm; the complete technic...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

remarks: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (s...

1050 liter pressure tank, Aisi 304

remarks: Tanks loose - frame no longer present; 1 manhole diameter approx. 400 mm in the front bottom (manhole cover fastening screws damaged)

1027 liter pressure tank, Aisi 304

remarks: Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank

10000 Liter tank for specific weights up to 1.4 KG/L, Aisi 316

• Manufacturer: A&B Apparate- & Behältertechnik Heldrungen GmbH

max. allowable working temperature: 80 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Type plate no longer available; further technical documents available; Di...

4000 liter insulated agitator tank, Aisi 304 with anchor agitator

max. allowable working temperature: 120 °C remarks: Manhole diameter approx. 510 mm; 4 round openings and 1 further small opening in the lower bottom; the seam of the insulation jacket was slightly loose in one p...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

12220 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom material temperatur control system: AISI 304 (V2A) 1.4301

10468 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and ar...

6050 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet padded (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

1000 liter cone container, Aisi 304

remarks: Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside