Used Machine Tools in Texas, USA

NOV TDS11 High Torque Top Drives, 1200 HP

• Manufacturer: NOV

NOV TDS11 High Torque Top Drives, 1200 HP. Both Top Drive are 100% Dyno Test Integrated Blowout Preventer (IBOP) Pressure Rating: 15,000 psi

Hydralift 1000 Ton Traveling Block

• Manufacturer: American Block

Manufacturer date: 2019-09-18 | Load capacity: 1,000 tons | Number of sheaves: 8 | Sheave diameter: 72 inches | Wire rope diameter: 2 inches | Weight: Approximately 38,500 l

IECS 4X3 SCR House

Input voltage: 600 VAC, 3-Phase | Input current: 980 Amps​ | Output voltage: 750 VDC​ | Output current: 1200 Amps​

Ideco 3000 Drawworks

• Manufacturer: Ideco

Rated power: 2,000 to 4,000 horsepower (HP)​ | Drilling depth capacity: 20,000 to 35,000 feet​ | Drum configuration: Single drum design

National Oilwell Varco Hydra Tong MPT KT 20000

• Manufacturer: NOV

National Oilwell Varco Hydra Tong MPT KT 20000 Key Specifications: Gear Speed: Dimensions:

Continental Emsco 100 TON Block With 8 Sheaves

• Manufacturer: Continental emsco

General Specifications: Sheave Diameter: Typically ranges between 36 inches (914 mm) and 44 inches (1118 mm) for blocks of similar capacity​ Wire Rope Compatibility: Commonly accommodates wire ropes with diameter...

Omron AC VFD House 3×4

• Manufacturer: Omron

Used in very good condition 3x4 Omron AC VFD House, set up for three 3512, TDS11 Top Drive, 2 Pumps 7500 PSI, Drawworks. The house has the 4th cabinet for adding another Genset and 3rd cabinet to add another mud ...

National 80-UE Drawworks

• Manufacturer: National Oilwell Varco, Inc

National 80‑UE Drawworks – Typical Specifications Engine & Power System • Rated Power: Typically around 800–900 HP (engine selection and configuration may vary) • Drive System: Combines a mechanical drive with hy...

National 80-B Drawworks

• Manufacturer: National

National 80‑B Drawworks Specifications Power Rating: • Approximately 1000 HP mechanical drive Design & Configuration: • Single-drum mechanical design • Often part of a rig setup featuring a 10‑line system Braking...

New Surplus Continental Emsco Drawworks C 2

• Manufacturer: Continental emsco

Continental Emsco Drawworks C2 – Specification Overview Power & Drive System • Engine Rating: Typically rated in the 1100–1500 HP range (often around 1200 HP as a mid-point example) • Drive System: Combines robus...

NOV NOV Elmagco Brake 7040W

• Manufacturer: NOV

NOV Refurbished with COC Elmagco Brake 7040W NOV Elmagco Brake 7040W – Representative Specifications General Description • Application: Designed for use in drawworks systems on drilling rigs where precise, high‐c...

New Surplus LeTourneau LDW550K Drawworks

• Manufacturer: Letourneau

Key Specifications & Features Line Pull Capacity: • Designed to deliver a high line pull – typically around 550,000 lbs (550K) – to handle long drill strings and heavy cable loads in deep‐well and directional dri...

National 1320 UE Drawworks 2000 HP

• Manufacturer: National Oilwell Varco, Inc

National 1320 UE Drawworks – 2000 HP Specification Overview Engine & Power System • Drive System: A high‑efficiency mechanical and hydraulic drive configuration that optimizes power transmission and fuel economy....

QT-2 Elmagco 15050W Drawworks Brakes

QT‑2 Elmagco 15050W Drawworks Brakes – Representative Specifications General Description • The QT‑2 15050W is a friction‐type brake assembly designed specifically for drawworks systems. It’s built to deliver cons...

AC 1500 Crown Drawworks

• Manufacturer: Crown

Surplus New AC 1500 Crown Drawworks Power & Engine: • Rated around 1500 HP – providing robust power for deep-well and directional drilling operations. Pullback & Line Pull: • Typically engineered to achieve pullb...

Hurco VM10U Machining Center

• Manufacturer: Hurco
• Model: VM10U

Good condition Hurco VM10U Machining Centers available between 2010 and 2011 years. Located in USA and other countries. Click request price for more information.