Used Granulators & Pelletizers

CUMBERLAND 484 GRANULATOR WITH FEED 17971

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 521000-85003, 14″ x 16″ feed throat. 3 knife twin shear rotor. 2 bed knives. 15 HP 460v motor. 4″ OD left hand airveyor. Insulated front tray feed hopper with rear mounted 8″ ...

PTI WATER RING PELLETIZING LINE 18007

One (1) used 1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox i...

NELMOR RG2257 GRANULATOR 18996

• Manufacturer: Nelmor

Nelmor model RG2257 granulator. 22″ x 57″ feed throat. 5 knife (15 pcs) open rotor with 2 bed knife positions (6 pcs). Top in-feed. 150 HP 460-volt 1785 RPM Bador Super-E motor. 10″ OD right hand airveyor dischar...

NELMOR G3048 GRANULATOR 12360

• Manufacturer: Nelmor

Nelmor model G3048 granulator, S/N 7410-7641. 30″ x 48″ feed throat, hard faced 3 knife staggered solid rotor, 2 bed knife, 200HP 460V 1,180 RPM motor. Hard faced cutting chamber, hand powered grease pumps on eac...

SEM 23 GRANULATOR 18754

SEM model 23 (Nelmor G1224M1) granulator. S/N 04C05784. 12″ x 24″ feed throat. 5 knife solid rotor with 2 bed knives. 40 HP 460-volt motor. Double wall insulated tray feed hopper with manual jack back assist. 5″ ...

CUMBERLAND 8″ PELLETIZER ROTOR 24 8429

• Manufacturer: Cumberland

Cumberland 8″ pelletizer rotor 24 tooth solid rotor helical cutter. Ceco part number 64743.

POLYMER 1010AE AUGER GRANULATOR 16721

Polymer model 1010AE auger granulator, S/N 1010AE443796. 10″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 10HP 460V motor. 8″ OD auger with a 12″ x 47″ long auger area and a 30″ in-feed he...

SCHEER BAY SGS-50E PELLETIZER 18133

• Manufacturer: Scheer

One (1) used Scheer Model SGS-50-E strand pelletizer. S/N SE5-0707. Nominal 2″ wide entrance. Has 20 knife carbide inlay helical style rotor driven by an A/C motor with Reliance variable speed controller. Mounted...

GALA 5MUP UNDERWATER PELLETIZING SYSTEM 17908

One (1) used Gala model 5MUP underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TWS-40 water system with heater, pump, heater exchanger, 5 HP model 8.2 BF dr...

MAAG 60E 30 KNIFE PELLETIZER 18631

• Manufacturer: Maag

One (1) used Maag “Primo” model 60E strand pelletizer having a 2.36″ (60 mm) entrance. Thirty knife helical rotor. 2.2 KW (3 HP) drive. 480/3/60. Poly top roll and steel bottom roll. Includes starter and touch sc...

CUMBERLAND 2050H HOG GRANULATOR 18724

• Manufacturer: Cumberland

Cumberland model 2050H granulator. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. No in-feed hopper. 160mm rotor bearings with air purge. Belt d...

GALA MUP7 UNDERWATER PELLETIZING SYSTEM 18847

Used Gala MUP 7 underwater pelletizing system (2010). Serial number 10300372.Package consists of the following: A) 6″ hydraulic slide plate screen changer with stand and 3 HP power pack B) 15 KW Cutter with stand...

GALA MUP7 UNDERWATER PELLETIZING SYSTEM 18844

Used Gala MUP7 underwater pelletizing system(2010). Serial number 10201571.Package consists of the following: A) 6″ hydraulic slide plate screen changer with stand and 3 HP power pack B) 15 KW Cutter with stand, ...

Rapid GK Granulators & Pelletizer

• Manufacturer: Rapid
• Model: GK

Good condition Rapid GK Granulators & Pelletizers manufactured in 2011. Located in USA and other countries. Click request price for more information.