Used Drilling Rigs

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

1994 GARDNER DENVER 15W DRILL RIG #4411T

• Manufacturer: Gardner Denver

Manufactured 1994, 10” table, 2 x 4 x 13 centrifugal mud pump, long kelly, air drawworks, mounted on 1994 Western Star truck, drilling daily, drawworks and table recently rebuilt, hydraulic pump cylinders rebuilt...

SIMCO 2400 TRACK MOUNTED AUGER DRILL RIG #5453Tc

• Manufacturer: Simco

Diesel engine, cathead, track mounted, no auto hammer Price: $57,500

1995 CME 45C AUGER DRILL RIG #5358T

Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800...

1995 MOBILE B47 AUGER DRILL RIG #619Tb

Manufactured 1995, Deutz ediesel engine, cathead, winch, hydraulic driven, Marooka carrier, no leaks, runs great Price: $87,500

CHICAGO PNEUMATIC T700 MAGNUM DRILL RIG #555Ti

• Manufacturer: Chicago Pneumatic

Built 1984, 1000/350 GHH compressor w/ Cummins KTA diesel engine, Detroit 60 Series 630 hp deck engine. The mast has been extended and the rig has been beefed up, 90,000 lb pullback, 20” table, mounted on Crane C...

1999 BAYSHORE 2T SPEED DRILL RIG #9519T

• Manufacturer: Bay Shore

Manufactured 1999, 24’ max depth, Mounted on 1999 International 4800 4 x 4 truck, PTO, 210 HP DT466E engine, Allison automatic transmission, 9000 hours, 59,000 miles, one owner/operator, 6 augers (12-25”) Price: ...

CARDWELL KB750 DRILL RIG #3982T

• Manufacturer: Cardwell

Rated 8,500’ with 4-1/2” drill pipe, (1) Detroit 60 engine 14L 650hp, Cardwell 112’ x 300,000# mast, Century 17-1/2” x 44” rotary tble, Ideco 160 ton Block, King 150 ton swivel, Regan 10” 3000 psi annular BOP, tr...

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500
• Operating weight: 23,000 kilogram

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition

2008 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2008 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720
• Horsepower: 385 horsepower
• Drilling depth: 30 meter

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

1973 PORTADRILL 10TL TOP HEAD DRIVE DRILL RIG #2916Tb

• Manufacturer: Portadrill

Manufactured 1973, top drive updated to a Foremost 5000 ft/lb torque head, standard 36’ mast can pull 30’ rods, but only makes connections with 20’ pipe, 3” plumbing, 2-1/2” swivel hose, 3 x 4 Mission mud pump, n...

SIMCO 2400 DRILL RIG #7055T

• Manufacturer: Simco

Freshly rebuilt 4-cylinder Wisconsin gas deck engine (rebuilt with approx 4 hours), 15’ mast, winch line, cathead, 1 speed drill head, new hydraulic pump, mounted on IC35 rubber tracked carrier with 3-cylinder De...

Atlas-Copco ECM 660 III Drilling Rig

• Manufacturer: Atlas-Copco
• Model: ECM 660 III

Good condition Atlas-Copco ECM 660 III Drilling Rigs available between 2004 and 2006 years. Located in USA and other countries. Click request price for more information.