Used performance testing in Ireland

Noiseken FNS-AXII-B50

• Manufacturer: NoiseKen

Details The Noiseken FNS-AXII-B50 3 Phase Fast Transient / Burst Immunity Test Generator offers precise testing with up to 4,500V output adjustable in 10V steps, meeting IEC 1000-4-4 standards. It supports Contin...

Schaffner NSG 223

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG223 Interference Generator Plug‑In delivers high‑energy pulses to simulate destructive transients such as switching inductive loads or lightning surges. It can superpose symmetrical...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Rohde & Schwarz ESRP7

• Manufacturer: Rohde & Schwarz
• Model: ESRP

Details The Rohde & Schwarz ESRP7 EMI Test Receiver offers a frequency range from 9 kHz to 7 GHz, designed for efficient and precise electromagnetic interference (EMI) measurements. It supports fast precompliance...

Schaffner NSG438

• Manufacturer: Teseq - Schaffner

Details The Schaffner Teseq NSG438 ESD simulator delivers up to 30 kV air and contact discharge, offers over 20 optional discharge networks, built-in ISO self-test calibration, high-energy battery operation, and ...

Schaffner NSG 200E

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 200E Mainframe is designed to house up to six different plug-in generators for precise line interference simulation. It provides essential shared functions such as mains connection, filt...

Rohde & Schwarz ESPC

• Manufacturer: Rohde & Schwarz
• Model: ESPC

Details The Rohde & Schwarz ESPC EMI Precertification Test Receiver offers a wide frequency range from 150 kHz to 1000 MHz, supporting all major EMI standards including CISPR, EN, FCC, and VDE. It features parall...

Solar 9354-1

Details The Solar 9354-1 is a precision transient limiter engineered to safeguard EMI receivers and spectrum analyzers from damaging conducted disturbances during compliance testing. Designed for use with LISNs, ...

Rohde & Schwarz FSET7

• Manufacturer: Rohde & Schwarz

Details The Rohde & Schwarz FSET7 is a high-performance test receiver that operates across a frequency range of 100Hz to 7GHz, offering precise signal detection and analysis. Designed for advanced RF and EMC appl...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG435

• Manufacturer: Teseq - Schaffner

Details The Schaffner Teseq NSG 435 is a handheld ESD simulator delivering a complete range of testing features in a compact design. It integrates a high-voltage generator that produces discharge pulses from 200 ...