Used performance testing in Dublin, Ireland

Schaffner NSG 223

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG223 Interference Generator Plug‑In delivers high‑energy pulses to simulate destructive transients such as switching inductive loads or lightning surges. It can superpose symmetrical...

Schaffner NSG 500C/506C

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-500C-506C is a surge disturbance simulator designed for reproducing electrical surge conditions in sensitive electronic equipment. It provides adjustable parameters for voltage, rise tim...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schaffner NSG2025-1

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-1 is a single-phase fast transient/burst generator delivering up to 4.4kV with a built-in 16A coupling network. It offers a maximum burst frequency of 1MHz, supporting 1 to 150 pulse...

Teseq (Schaffner) NSG 4070

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG 4070 is a flagship multifunctional immunity test system spanning 9 kHz to 1 GHz for development and certification workflows. It integrates a wideband signal generator, internal amp...

Schaffner NSG 225A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-225A is a modular EMC disturbance simulator mainframe designed to work with plug-in generator units. It manages mains input, overload safeguards, phase monitoring, and integrated line fi...

Schaffner CDN110

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN110 is a single-phase surge coupling/decoupling network designed for use with the NSG651 High Energy Pulse Generator. It enables coupling of pulses up to 6.6 kV (1.2/50 µs waveform) or su...

Schaffner SL400-071

• Manufacturer: Teseq - Schaffner

Details The Schaffner SL400-071 is a precision line impedance stabilization network (LISN) engineered for EMI/EMC measurements. It provides a stable, controlled-impedance path to accurately measure conducted nois...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...