Used Saws in Lesser Poland, Poland

Kolbe bandsaw K 200

• Manufacturer: Kolbe

Kolbe bandsaw Model: K 200 The saw can cut meat and bones Power: 1.1 kW Dimensions: 530 x 520 x 1000 mm Made of stainless steel Stock: 1 piece Condition: used

BAND SAW BIANCO MOD270

Automatic raising and lowering of the arm Hydraulic vise clamp Pivoting arm Machine fully operational, in very good condition

PRVOMAJSKA BAND SAW HAP280 AUTOMATIC

• Manufacturer: Prvomajska

Possibility to work in automatic Maximum cutting diameter: 280mm | Total power: approximately 4 kW | Tape dimensions: 3660x25x0.9mm | Weight: approximately 1500kg | Dimensions (length / width / height): 2000mm / ...

JAESPA W 420 AZ/P BAND SAW

• Manufacturer: Jaespa

Roller feeder Manual or automatic operation Adjustable feed and saw speed Automatic material diameter measurement Programmable cutting cycles Digital readout

JAESPA BAND SAW W 260 DGH

• Manufacturer: Jaespa

KASTO BAND SAW SBL 380 U

• Manufacturer: Kasto
• Model: SBL380U

Torsion vise Maximum cutting diameter: 380mm | Maximum flat cutting width: 500mm

BAND SAW FORTE 420

• Manufacturer: Forte

Torsion vise Coolant pump Hydraulically lowered arm Coolant pump

BAND SAW FORTE F 320 GS

• Manufacturer: Forte

Swivel arm Machine in very good condition Year of production: 1993 | Max. cutting diameter: 320mm

ELU 300mm SAW

• Manufacturer: Elu

ELUMATEC 350mm saw

ROTOX SAW

• Manufacturer: Rotox

ROTOX SAW

SAW FOR WEGOMA LATTERS

• Manufacturer: Wegoma

SAW FOR WEGOMA LATTERS

ELUMATEC 350mm saw

• Manufacturer: Elumatec

ELUMATEC 350mm saw

Band saw TOP-PORĘBA MEX-230PA

Belt cutting machine TOP-PORĘBA MEX-230PA The largest dimensions of the cut material (H x W): -230mm; 230x340 mm or 90x400 mm Perpendicular to axis cutting: - 200mm; 230x170 mm or 180x200 mm Belt drive motor / po...

Elu MGS 72

• Manufacturer: Elu

Elu MGS 72 crosscut saw for aluminum and wood 2.0 kW/400V/2700U/min motor. Saw speed 3500 rpm. Cutting length max 190 mm. Cutting height max. 90 mm. Saw torsion right/left in the horizontal plane +(-) 45. Saw bla...

2000 BOMAR STG 230 GA 300

• Manufacturer: Bomar
• Model: STG 230

Automatic band saw Bomar STG 230 GA 300 Two-speed motor 1,0 /1,5kW/400V/50Hz Cutting at an angle 0-45 Max.cutting width 280mm. Max.cutting height 230mm. Hydraulic table travel 300mm. Saw speed 35 / 70 m/min. Dime...