Used Foundry & Casting in Wallonia, Belgium

Core shooter Laempe LF100; 100l

• Manufacturer: Laempe / Röperwerk

Core box dimensions: Time (without gassing) : - Automatic change time of horizontal box and firing plate: ±3min Power consumption: 3×400V, 50Hz; 3×150A; 55KW+15KW (vacuum pump 0.75KW)

Shake-out convayorJML 7000mm×2200mm

• Manufacturer: JML

Outer dimensions: length: 7300mm; width: 2900mm; height:2600mm Inside dimensions: Length: 7000mm; Width: 2200mm; Height: 25 mm With 2 unbalanced axles driven by 1 motor (30KW) Driven by 5 belts On springs With 2 ...

Moulding machine BMD, type ARPA 300

• Manufacturer: BMD

Pressing capacity 15 000 kg Lifting by rollers Weight: ± 2600 kg | Dimensions: length 1100 mm, depth 1500 mm, height 2300 mm | With table: 960 mm x 580 mm | Pressing stroke: 130 mm | Lifting stroke: 220 mm | Jolt...

Comrpessed air sprayer for coating, ± 40 l

• Manufacturer: RHONA

External dimensions: length 600 mm, width 500 mm, height 960 mm Air inlet with pressure regulator, overpressure valve On 2 wheels With pressure gauge on the cover

Black marble surface plate, 1200 mm x 800 mm

• Manufacturer: OELZE

On substructure (steel) With 5 adjusting screws Make: OELZE | Weight: ± 500 kg | Dimensions: length 1200 mm, width 800 mm, height 840 mm

Steep conveyor 30 000 mm, useful width 1150mm

External dimensions: length 32 850 mm, width 1360 mm, height 580 mm Motor: 0,75 kW, 220/380 V, type gear motor, 1,8 rpm at the outlet Feet adjustable in height Roller covered with rubber Transmission from the mot...

Vibrating needle for beton with electric drive unit

With cable of 10 m to the drive unit With 5 m in protection hose up to the needle

Overband magnet STEINERT, 2,7 KW 900 mm x 750 mm

• Manufacturer: Steinert

With transformer / rectifier and switch Weight: 2000 kg | Dimensions: length 2250 mm, width 1150 mm, height 900 mm | Motor: 2,2 kW, 220/380 V, make VDE, 1430 rpm | Magnet surface: 900 mm x 750 mm | Belt width: 80...

Moulding boxes, 620 mm x 600 mm x 460 mm

With trunions With bushings 4 clamping pins Weight: 110 kg/pc

1980 Moulding machine KÜNKEL WAGNER, APM.f1

• Manufacturer: Künkel Wagner

Moulding machine without foundation With pneumatic drived head pivoting With pneumatic table vibrator

Conical perforated stainless sheets for fluid beds

Only on request Stainlees sheets Conidur with double conical perforation towards the length serve for dedusting of silica sand, e.g. for inserting air aerator and moving the sand forward These sheets are only mad...

Simple floor type grinder RICHARDS Ø 760mm

Screw mixer HMS, 1 arm, ± 5 t/h

Height: inlet: 1760mm With pneumatic slide on the inlet With 2 pumps With emergency stop With control board

1989 Semi-automatic moulding plant HWS-HSP-2

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

Vibro-loading conveyor THOMAS LOCKER

• Manufacturer: Thomas

External dimensions: Lenght: 3550mm; Hight: 2900mm (height floor-conveyor: 1630mm) Usesul dimensions: Lenght: 3100mm; on the top: 2250mm ; on the bottom 600mm; height: 700mm 2,2KW; 380V; 3PS up to air cushion vib...