Used Foundry & Casting in Wallonia, Belgium

505 mm x 305 mm x 150 mm, 14 kg

Sandlabo sand compactability tester G&F, PVG

Hydraulic unit with hand pump With sleeve for sample Ø 50 mm, h. 120 mm

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

Furan sand molding carousel with mixer AXMANN, 20 t/h

• Manufacturer: Axmann

Type: TMVG 20, serial number: 4955 Year of construction: 1985, weight: ± 7500 kg Mixer with turbo screw, 860 mm, Ø 280 mm, motor 18,5 kW Height outlet: 2270 mm, filling height: 3350 mm, with premixing screw 1600 ...

Core transport trolley, 3 supports, FREIMUTH

Year of construction: 2008, weight: ± 300 kg With 4 wheels and 2 forklift pockets With 2 supports flapping upwards by gas springs

Shake-out grid 1150 mm x 900 mm

Useful dimensions: 1150 mm x 900 mm, h. 1550 mm (2 pc), 2000 mm (1 pc) Motor VEM, 3 kW, 1420 rpm, 230/400 Hz With a small gray cone below Vibration through vibrationg axle On 8 springs Driving between motor and a...

Gas radiant heater, natural gas

Collector length 375 mm, width 280 mm With pressure regulation

Sand silo 33 m³, complies with ± 50 t

With level sensor on the roof, manhole, 4 removables feet (for the transport) Without ladder, balustrades, filter (dust collector), outlet clap, filling tube

Roll over with mould station

Roll over Rotation by electric motor Electric motorisated rolling conveyor Mold closing station clamps close pneumatically Rolling conveyor not motorized

Dosing srew, Ø 50 mm, with hopper

Year of construction: 1990, weight: 140 kg Motor BAUER, type 022-10/DK94241K, 1,1 kW, 99 rpm (exit), 220/380 V, brake motor With inductive rotation measuring sensor With agitator for the product flow The scew ove...

Overbelt magnet, 760 mm x 410 mm, 110 V, ± 1.64 kW

Type: TRANS C25010, serial number: CC110 Gear motor UNELEC, 0,75 kW; 220/380 V Ø rolls 540 mm, width 800 mm, belt width 760 mm 1550 mm between axes V-belt drive

Double polishing machine REMA, type DPN

• Manufacturer: Rema

2,2 - 3 kW; 1450/2900 rpm; 220 V 2 electronic speeds

Dosing screw, useful dimensions Ø 130 mm, length 1140 mm

Gear motor LEROY SOMER, LS90L3DP; 1,5 kW, 2 x 835/2800 rpm; 380 V With flange at the inlet and the outlet With coupling and brake

Shank, Ø 195 mm, type A25/30

Weight: 15 kg Length: 2000 mm Weight: 15 kg | Length: 2000 mm

Small horizontal band grinder,

Belt transmission (2 x) With emergency stop switch