- Trusted Seller
Johnsford Super Horizontal HMC-500-H
used
- Manufacturer: Johnford
Travels: X-30" Y-26" Z-26" 35 H.P. Spindle 10,000 RPM 60 ATC Cat 50 Taper Tooling 2-19.7" x 24.8" Pallets (630 x 500 mm) Cutting Feeds: 0.04 to 591 IPM Rapid Traverse X,Y,Z...................... 1,575 IPM Approx ...
Wixom, MI - Trusted Seller
2007 JOHNFORD HT100E2D
used
- Manufacturer: Johnford
- Model: HT100E-2D
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.* Equipped With: Fanuc ...
$999 USDHouston, TX 
2012 JOHNFORD DMC1500H
used
- Manufacturer: Johnford
- Model: DMC1500H
- Spindle Taper: CAT 50
- Control: Fanuc OiM-C CNC Control
Fanuc OiM-C CNC Control Chip Conveyor Coolant Thru Spindle 4th Axis Rotary Table
- Trusted Seller
2007 JOHNFORD HT100E2D
used
- Manufacturer: Johnford
- Model: HT100E-2D
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.* Equipped With: Fanuc ...
$999 USDHouston, TX 
2004 JOHNFORD HT-60-2D
used
- Manufacturer: Johnford
- Model: HT60-2
JOHNFORD HT-60-2D CNC twin Turret Lathe Twin Turret, Chip Conveyor, Programable Tailstock, 24″ Chuck EQUIPPED WITH: Fanuc 18T CNC Control 24″ 3-Jaw Power Chuck RS-232 Port 12 Position Upper Turret 12 Posit...
Shawnee, OK
2004 JOHNFORD HT-60-2D TWIN TURRET, 24" CHUCK
used
- Manufacturer: Johnford
- Model: HT60-2
JOHNFORD HT-60-2D CNC Lathe, 2004 – Twin Turret, Chip Conveyor, Programable Tailstock, 24″ Chuck Max Swing Way Covers 28.7″ Max Swing Over Cross Slide 23.6 Max Distance Between Centers 59″ Standard Chuck Size...
- Trusted Seller
1997 JOHNFORD VMC-3020
used
- Manufacturer: Johnford
- Control: Fanuc
Control: Fanuc | X-axis: 120.0 in | Y-axis: 35.0 in | Z-axis: 28.0 in | Rpm: 8000.0 rpm | # atc: 0.0 | Taper: CAT 50 | Table-w: 1000.0 mm | Table-l: 3200.0 mm
United States - Trusted Seller
2012 JOHNFORD DMC-1500H
used
- Manufacturer: Johnford
- Model: DMC1500H
- Control: Fanuc 0iM
59" x 35" x 30", 5 Axis Trunnion, Bridge Type, Fanuc OiMD with Manual Guide i, 24 ATC, 6000 RPM, 1000 PSI High Pressure Coolant Through Spindle Table Size: Hours 4337 Run Time Hours 3574 Cutting Time
United States 
Johnford Vertical Machining Center, DCM 2100SH, X-81, Y-72", Z-31.5", Distance U/R 37.5", Table 60" X 86", 10,000 RPM, 30HP,
used
- Manufacturer: Johnford
- Spindle Taper: HSK A63
X-travel: 81" | Y-travel: 71" | Z-travel: 31.5" | Table width: 60" | Table length: 87" | Table load capacity: 22,500 lbs | Spindle motor: 30 HP | Spindle speeds: 10000 rpm | Spindle taper: HSK A63 | Machine weig...
Texas, USA- Trusted Seller
2015 JOHNFORD SV-48H
used
- Manufacturer: Johnford
- Model: SV48H
*2speed Gear *2 speed Geared verified X: 48.0 in | Y: 28.0 in | Z: 24.8 in | Power: 20.0 hp | Rpm: 6000.0 rpm | # atc: 20.0 | Taper: BT/CAT-50 | Table-w: 27.6 in | Table-l: 51.2 in | # axis: 3.0
Santa Ana, CA 
2018 Johnford SL500A
used
- Manufacturer: Johnford
- Model: SL500A
CNC Lathe Used Johnford SL500A (2018) CNC Lathe for Sale. This pre-owned Johnford CNC lathe is located in The United States and available to be seen under power for an inspection. If you have any questions rega...
USA
2018 Johnford ST-70DH
used
- Manufacturer: Johnford
- Model: ST70
CNC Lathe Used Johnford ST-70DH (2018) CNC Lathe for Sale. This pre-owned Johnford CNC lathe is located in The United States and available to be seen under power for an inspection. If you have any questions reg...
USA
2017 Johnford ST-40CX
used
- Manufacturer: Johnford
- Model: ST40CX
CNC Lathe Used Johnford ST-40CX (2017) CNC Lathe for Sale. This pre-owned Johnford CNC lathe is located in The United States and available to be seen under power for an inspection. If you have any questions reg...
USA- Trusted Seller
JOHNFORD SV-48H CNC Vertical Machining Center, 2012
used
- Manufacturer: Johnford
- Model: SV48H
- Spindle Taper: CAT-50
Discover the 2012 JOHNFORD SV-48H CNC Vertical Machining Center—gently used, featuring FANUC control, 4th-axis table, and high-pressure coolant system. Ideal for precision machining.
Los Angeles, CA - Trusted Seller
2001 JOHNFORD VTC 880 + APC + ATC
used
- Manufacturer: Johnford
FULL C AXIS MILLING TAPPING X, Z, C, A AND B AXES HIGH PRESSURE COOLANT PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING
Tipton, United Kingdom 
Johnford VMC1300HD Machining Center
used
- Manufacturer: Johnford
- Model: VMC1300HD
Good condition Johnford VMC1300HD Machining Centers available between 1999 and 2011 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
