Used Machine Tools in Gauteng, South Africa

RASKIN R20 ECCENTRIC PRESS

• Manufacturer: Raskin

Adjustable stroke Capacity: 20 ton | Strokes per minute: 158 | Bed: 450 x 350

RASKIN R100 ECCENTRIC PRESS

• Manufacturer: Raskin

Fully serviced and in very good working condition. Adjustable stroke

IWM PNEUMATIC LAMINATING PRESS

• Manufacturer: Unknown

Fully serviced and quality guaranteed Suitable for panels, tabletops and beams 9 x Pneumatic cylinders (Can operate individually) 9 x Mechanical hold downs

IWM HYDRAULIC DOOR PRESS

• Manufacturer: Unknown

Fully serviced and quality guaranteed 5 Cylinder press (3 Vertical, 2 horizontal) 380V / 3 phase

IWM R20 ECCENTRIC PRESS

• Manufacturer: Unknown

Adjustable stroke Capacity: 20 ton | Strokes per minute: 150 | Bed: 570 x 440

Bandsaw 220v

Deformation of bars under bending or torsion (WP 100)

elastic deformation of statically determinate or indeterminate beams under bending load Description: Bending and torsion are typical loads to which components are subjected. The resultant stresses and deformation...

Beam on two supports: bending moment diagram (WP962)

application of the method of sections to determine the bending moment Description: WP 962consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point t...

Assembly of bending device (TZ 200.11)

GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...

Free vibrations in a bending beam (SE 110.58)

natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...

Ungraded Control Stone TO BS812-114, EN1097-8 (LAG150)

25kg ungraded. Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, the goods supplied ma...

Mould Plate TO BS812-114, EN1097-8 (LAG139/2)

For accelerated polishing machine to EN 1097:3, ASTM C29-97, AASHTO T19-93, BS 812, UNI 8520 :6, ISO 6872, CNR N. 62, CNR N. 63, CNR N. 64 Due to the continuous development of our products, the goods supplied may...

Los Angeles Abrasion Safety Guard Set (LAG179)

For LAG175 Los Angeles Abrasion Machine Three panel system. Each one measures 800mm high x 970mm wide x 30mm thick and weighs just 3 kg, with a 150mm x 200mm “Caution” warning sign on each panel. Due to the conti...

Aggregate Impact Value TO BS812-112 (LAG165)

Aggregate Impact Value apparatus with mould to BS812:110 The AIV apparatus consists of a hammer with a trip action release, mould and automatic blow counter. All this is contained within a rigid frame to ensure f...

Graded Control Stone TO BS812-114, EN1097-8 (LAG150/G)

20kg Graded. -10mmSHPP +7.2mm slot Used in the polishing Machine to provide a comparison against which the results of the aggregate under test can be measured. Due to the continuous development of our products, t...