Used Bar Feeders/Loaders

3" W. x 2 7/8"Str x Baird, No. 219, Baird Mechanical Feed Off 219 Baird 2 Pass 3" wide 2.87" Max length with hub chain and sprockets
- Manufacturer: U.S. Baird
Baird Mechanical Feed From 219 Baird 2 Pass Baird Feed 3" Wide x 2.87" max. Feed length With Feed Hub Eccentric, Chain and Sprocket Good Condition
Thomaston, CT
3" W. x 2"Str x 0.065", CWP, No. DDR32XH, CWP MECHANICAL ROLL FEED 3" X 2" X .065
- Manufacturer: CWP
CWP MECHANICAL ROLL FEED MODEL NO. DDR32XH SERIAL NO. F4486 MAX WIDTH OF STOCK 3 MAX LENGTH OF STOCK 2 MAX STOCK THICKNESS .065 NO HUB
Thomaston, CT
3" W. x 3"Str x 0.075", Pow Air, No. C-3, 3" x 3" x .075 air feed with built in trigger (new condition)
- Manufacturer: POWAIR
POWAIR AIR FEED Model C-3 Date code 24-6-92 Max Width 75mm or 3" Max Thickness 1.9 mm or .075" Max Stroke 76 mm or 3" Max Speed 200 SPM at max length Pulling Power 20g or 45 pounds Built in Trigger Good ...
Thomaston, CT
Trusted Seller
PS50 Shearfeed Systems
- Manufacturer: Automec
The operator loads a blank onto PS 50, locks the parts in place with pneumatic grippers, and sets the feed in motion which automatically triggers a shear, punch or stamping machine. PS 50 advances the material to...
Waltham, MA
LNS Group Quickload Servo S2
- Manufacturer: QuickLoad
Remote Control Pendant, Rear Load Magazine Table 220 Volt, 3-Phase
Plymouth, MN
New in Package Sandvik Coromant C5-390.00-M16-01 Capto 5 Quick Change Pull Stud
- Manufacturer: Sandvik
New in Package Sandvik Coromant C5-390.00-M16-01 Capto 5 Quick Change Pull Stud New in Package Sandvik Coromant C5-390.00-M16-01 Capto 5 Quick Change Pull Stud Click images to enlarge Description INV 6650 New in ...
Savage, MN
Trusted Seller
Bar Feeder
Bar Feeder. Capacity- about 4 inch diam. (To be verified. ) 2 chucks. Hydraulic
Montreal, Canada
Trusted Seller
UNIVERSAL AUTOMATIC AS
- Manufacturer: UNIVERSAL AUTOMATIC
Equipped With FEATURES: 17" Vibratory Bowl Feeder Air Clamping Coolant Pump and Tank
Vaughan, Canada
Trusted Seller
2005 JERN YAO JBF-19B5S
- Manufacturer: JERN YAO
Equipped With * Oil Centrifuge * New exit conveyor * Wire turntable
Vaughan, Canada
Trusted Seller
1982 NAKASHIMADA PF-1080
- Manufacturer: Nakashimada
Equipped With Double Knife Shearing Method Fingerless Transfer System Positive Knockout -Second & Third Punches Knock out relief device Positive Interlocked lub system on all critical areas Eddy-Current variable ...
Vaughan, Canada
Trusted Seller
NUTAP UNT 20
- Manufacturer: Nutap
Equipped With * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electronically Control of Indexing ...
Vaughan, Canada
Trusted Seller
1987 NAKASHIMADA PF-420
- Manufacturer: Nakashimada
- Model: PF-420
Equipped With * Fingerless transfer Maximum cut-off diameter: 4mm (.158") | Maximum cut-off length: 25mm (1.00") | 1st die knockout stroke: 50mm (2.00") | 2nd die knockout stroke: 20mm (.788") | Output: 80, 100, ...
Vaughan, Canada
2015 HAAS CNC MAGAZINE BAR FEEDER V2 2015’ USA #7641
- Manufacturer: Haas
- Model: BARFEEDER V2
HAAS CNC MAGAZINE BAR FEEDER V2 2015’ USA #7641 Reference #7641 Model # V-2 Serial # 95008 Year of manufacture- 7/2015’ Bar diameter range- 0.375” – 3.00” Bar Length- 48” Minimum bar length- 10” Tray capacity- (3...
$9,500 USD
Get financing
Est. $187/mo
Sarasota, FL
2018 HAAS CNC MAGAZINE BAR FEEDER V2 2018’ USA #7577
- Manufacturer: Haas
- Model: BARFEEDER V2
HAAS CNC MAGAZINE BAR FEEDER V2 2018’ USA #7577 Reference #7577 Model # V-2 Serial # 96162 Year of manufacture- 10/2018’ Bar diameter range- 0.375” – 3.00” Bar Length- 48” Minimum bar length- 10” Tray capacity- (...
$12,500 USD
Get financing
Est. $246/mo
Sarasota, FL
2005 LNS ECOLOAD
- Manufacturer: LNS
Bar diameter: 1/4? to 2-1/2? | Bar length: 11? – 59? | Incoming voltage: 200/220 | Dimensions: 96" x 48" x 60" | Weight: 1,500
$2,000 USD
Georgia, USA