Used Woodworking in Bavaria, Germany

MöHRINGER SWEH2

• Manufacturer: Möhringer

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Side adjustment: 330 (mm) (Standard gauge) Driving speed: forward and ba...

Pressure rollers

• Manufacturer: simon möhringer anlagenbau

technical data: Purpose: for boards Dimensions: 700mm wide Note: as good S51230824 as new Warehouse: S51230824 Wiesentheid seller offer No. resale ame618

1994 MöHRINGER Autojet

• Manufacturer: MöHRINGER

Board edger Autojet used Cutting heights 18 - 100 mm, 3 variable axes - 2 variable stems - Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cos...

Thicknessing plane Panhans 510 mm incl. VAT.

• Manufacturer: Panhans

Type 425 Year 1981 little run 4 cutterblocks Resharpenable planing knives 5.5 motor 2 feed speeds 7 and 14 m - min . 2 height-adjustable sliding rollers in the thick table Steel infeed and outfeed roller Max . Pl...

Swivel spindle moulder Martin incl. VAT.

• Manufacturer: Martin

Martin T 25 Year 1985 few operating hours 5,5 KW motor with brake 4 speeds 3000/ 6000 and 4500/ 9000 rpm Min . Right and left running 30 mm spindle Tiltable 5 degrees minus to 45 degrees plus Electric height and ...

Felder long belt sander 2200.-€ including VAT

• Manufacturer: Felder

Felder long belt sander 2200.-€ including VAT

Holzher edge banding glue 0.5 - 8 mm incl. VAT.

• Manufacturer: Holz-Her

Year 1995 Type 1436 SE With glue pot Without pre-milling Cross-cut knife Saw flush Milling radii Radii scraper Buffing unit dimensions 420 x 100 x 160 cm VAT is shown on the invoice

LÖWER edge sanding machine with belt oscillation

• Manufacturer: Löwer

LÖWER edge sanding machine with belt oscillation Year 2006 Motor 2,2 kW 1400 rpm. Sanding unit swivels 90-60° with handwheel Oscillation stroke 20 mm - Motor 0.37 kW Sanding sleeves 30/40/50 mm Belt dimensions 25...

Felder wide belt sander 1100 mm incl. VAT

• Manufacturer: Felder

Fw 1102 perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Infinitely variable feed rate: 2.5 – 18 m/min Sanding height: 3 – 170 mm Sanding belt dimensions...

Format 4 surface/thickness planer 51 cm. Incl. VAT.

• Manufacturer: Format 4

Dual 51 Year of manufacture 2022 Silent Power spiral cutterhead 7.35 kW motor with brake 505 mm planing width Thickness planing min. 3 mm max. 255 mm Joint table length 2250 mm Electric table height adjustment In...

Mayer veneer saw with planing head 3500 mm cutting length

• Manufacturer: Mayer

Dimensions 530 x 160 x 130 cm Pneumatic material clamping 400 volts Good condition Tel. 09803/696 Inquiries with phone number and address

Safety milling fence 1258076

Machine infoSafety stop plate set for retrofitting table milling machines Used machines Safety fence jaws set consisting of: 2 pcs. cast metal stop plates 500mm 2 pcs. slot profile rail 2 pcs. aluminum splitter t...

Martin T 90 with 5 shafts 1258030

• Manufacturer: Martin
• Model: T90

Machine infoMartin T 90 with 5 shafts ideal construction timber planer four-sided planer max. cross section 260x160mm with additional horizontal spindle Spindle arrangement: - right jointing spindle - left mobile...

Kölle F 45 milling machine 1258068

• Manufacturer: Kölle
• Model: F45

Machine infoKölle F 45Table router with swivel spindleUsed machine with the number #1005with accessories: 3 Aigner brackets for mounting table extensions (Table extensions are not included!)Technical data:Table s...

Knopp cross belt sander

• Manufacturer: Knopp