Used Tillage Equipment in England, United Kingdom

2000 Cousins VF650CFT13TP24

• Manufacturer: Cousins
• Working width: 6.5 meter

9 subsoiling legs with shearbolt protection. Very good wearing metal and fitted with Cousins Quickfoot / Tim Howard legs, depth wheels and 24 inch rear toothed packer. in good order throughout and fitted with new...

Miles Hi-Rise Mole Drainer

• Manufacturer: Miles

In excellent condition. Fitted with a new leg, 3″ bullet and 4″ steel expander. The skids on the bottom of the beam are nearly new.

Taylor Gent 120/150

• Manufacturer: Taylor

C/w depth wheels 3 subsoiling legs on swivels at 950mm spacing (outer 2 legs are set at 74″ centers), 230mm wide x 500mm dia. adjustable depth wheels and reasonable wearing metal. 2.5m Transport width.

15 foot rigid mounted flexityne cultivator

15ft working width Quite a complete machine

1996 Kverneland LD85-160

• Manufacturer: Kverneland
• Model: LD85/160
• Implement weight: 2,000 kilogram

C/w no.28 bodies, tungsten points, manual vari-width Serial number 9330

Wiberg 5.8m Seedbed Cultivator

• Manufacturer: Wiberg
• Working width: 5.8 meter

Project machine. Fitted with levelling boards, 3 rows of C tines and Reekie following harrow. The cultivator has a not been used for a long time and has a lot of rust about it, missing tines, poor tyres, etc. 3m ...

Mcconnel Shakerator

• Manufacturer: McConnel
• Model: SHAKERATOR
• Working width: 4.5 meter

11 leg, depth wheels, DD packer with hydraulic depth control

2010 Simba X-press

• Manufacturer: Simba
• Model: X-PRESS
• Working width: 4 meter

Disc angle adjustment, proactive discs, DD packer Working width: 4

Cousins SW306F22B

• Manufacturer: Cousins

A well cared for set of rolls with 22″ breaker rings! Fold and unfold well and fitted with a good set of tyres. Ready to go to work.

2020 Claydon 7.5m Straw Harrow

• Manufacturer: Claydon
• Working width: 7.5 meter

In very tidy condition. 16 pairs of 14mm sprung tines with hydraulic angle adjustment.

Kuhn 4m power harrow

• Manufacturer: Kuhn
• Model: 4M POWER HARROW
• Working width: 4 meter

C/w good blades and rear crumbler roller Runs up but a few of the rotors are leaking and the bed seems a little rumbly. The gear box is quiet.

2003 Simba APR/8.2/FW/DD

• Manufacturer: Simba
• Working width: 8.2 meter

Good DD rings. Hydraulic folding to sub 3m transport width. Bearings and scrapers seem good throughout. Some welding but a serviceable machine.

2010 Cousins 3.6M Patriot

• Manufacturer: Patriot
• Working width: 3.6 meter

Hydraulic disc adjustment Well built machine comprised of 6 Quickfoot subsoiler legs, 2 rows of 500mm discs and a 650mm Razor ring packer at the rear. 3.6M working width, 3.8M transport width. Had some strengthen...

Mcconnel 3.5m Shakaerator

• Manufacturer: McConnel
• Model: Shakaerator
• Horsepower: 125 horsepower
• Working width: 3 meter

C/w depth wheels 9 shakaerator legs at 375mm spacing. The frame has had some welding but is sound.

1990 Simba 3B

• Manufacturer: Simba
• Model: 3B
• Working width: 3 meter

Excellent wearing metal. A good strong set of discs with manual gang angling. Discs are currently measuring between 28″-29″ in dia. Fitted with new scrapers throughout, gangs tightened, bearings checked and repla...