Used Slitters & Slitting Lines in Germany

Longitudinal cutting system type LSA 4/25/1600

Circular cardboard scissors (length cutter)

The circular cardboard shears are designed for longitudinal cutting of thick material webs (e.g. cardboard, leather, rubber, sponge cloth, etc.). The sturdy design safely absorbs the high forces that occur during...

Length cutter for weighted film web

With the "crush cut" cutting process used here (crush cut knife on glass-hard sleeve), a wide variety of materials (e.g. weighted film web, max. 6 mm thick) can be cut without any problems.

Slitter rewinder S278

• Manufacturer: Kampf

Slitter rewinder Working width: 1100 mm | Diameter of reels: 1000 mm

Slitter rewinder S326

• Manufacturer: Kampf

Slitter Rewinder Working width: 1100 mm | Diameter of mother reel: 1500 mm

AUXMET Slitting

• Manufacturer: AUXMET

manual adjustment of loose side 2-step gear Yearr: 1989 | Strip width: max. 1.840 mm | Strip thickness: max. 0,3 – 3 mm | Shaft-ø: 224 mm | Blade-ø: 350 mm

1992 GUIDA Slitting

• Manufacturer: GUIDA

coil magazine coil car paper winder decoiler with hold-down arm and shifting base plate coil opener/pinch roll unit/leveller crop shear with scrap switch and scrap bucket pinch roll unit looping pit I with loopin...

1999 TILGERT Slitting

• Manufacturer: TILGERT

mounting device for separating shaft 2 pinch rolls strip brake cross-cut shear with scrap bucket carry-over table with separating shaft

1990 SEH Slitting

• Manufacturer: SEH

entry stand with pinch roll unit edge trimmer scrap cutter with scrap conveyor accessories hydraulics electric control documentation

2009 CAMU Slitting

• Manufacturer: CAMU

loop exit brake stand carry-over table Strip width: max. 1.500 mm | Strip thickness: 0,3 - 3 mm | Speed: max. 20 m/min | No. of pinch rolls: 2

1972 SUNDWIG Slitting

• Manufacturer: Andritz

adjustment loose side of slitting stand: manual pinion gear unit

1978 SIGNODE Slitting

• Manufacturer: Signode

turnstile coil tilter with stripper mandrel and rolls intermediate roller table with driven rolls centering and banding station intermediate roller table with driven rolls carry-over table with stacking dev...

DEMPEWOLF/ FIMI Slitting

• Manufacturer: FIMI

clamping on base plate Year (overhauling): 2011 | Strip width: max. 1.560 mm | Strip thickness: 1 - 7 mm | No. of slits/strip thickness: 26/3 mm | Speed: max. 120 m/min. | Blade shaft ø: 280 mm | Blade ø: 420 mm

1979 SCHMITZ Slitting

• Manufacturer: Schmitz

transversal movement spare blades without electrics

2003 JOINT (SALICO) Slitting

• Manufacturer: JOINT (SALICO)

paper winder decoiler with hold-down arm and shifting base plate coil opener/pinch roll unit/foil entry crop shear with scrap bucket strip centering slitting stand scrap winder looping pit equipment with separati...