Used Saws in North Brabant, Netherlands

Pressta Profilma 501E

• Motor power: 7.5 kW • Saw blade diameter: 550 mm • Speed: 2,850 rpm • Maximum cutting height at 90º: 150 mm • Maximum cutting width at 90º: 270 mm • Equipped with microdosing system • Operation by means of two-...

Pressta Profilma 400V

• Motor power: 12.0 kW (optional 18.0 kW) • Saw blade diameter: 400 mm • Speed: 2,500 rpm • Maximum cutting height at 90º: 120 mm • Maximum cutting width at 90º: 200 mm • Equipped with microdosing system • Operat...

Mecal SW 553 Argus

• Manufacturer: Argus

• Saw blade diameter: 550 mm • Pneumatic positioning of saw angles: from -22.5º to 90º • Maximum saw length: 4,000 – 5,000 – 6,000 mm • Minimum saw length: 350 mm • Saw blade cooling by means of microdosing syste...

Mecal FE 400 Inox Vico-3

• Saw blade diameter: 400 mm • Servo-controlled positioning of saw angles: from -45º to +45º • Minimum/maximum saw length: 0/5,200 mm • Saw blade cooling by means of microdosing system and water emulsion cooling ...

Mecal SW 553 Reverse Garda

• Saw blade diameter: 550 mm • Servo-controlled positioning of saw angles: from -22.5º to +45º • Maximum saw length: 5,000 – 6,000 mm • Minimum saw length: 245 mm • Saw blade cooling by means of microdosing syste...

Mecal SW 453 Plug

• Saw blade diameter: 500 mm • Pneumatic positioning of saw angles: from -22.5º to 90º • Maximum saw length: 4,000 – 5,000 – 6,000 mm • Minimum saw length: 260 mm • Saw blade cooling by means of pneumatic lubrica...

Throttles TL 302-M | 302-SA

• With 1 manual (M) or 2 pneumatic (SA) clamps and lubrication of the saw blade • Manual upswing movement with saw blade diameter 300 mm • Cutting angle: only 90°

Thorwesten Exenso SSA 9

• Increased productivity when sawing steel reinforcement in automatic cycle • Material flow through FIFO system • Residual waste optimization through software • Simple touchscreen operation • Maximum profile leng...

TigerSaw 2000

• Repeatability: ± 0.2 mm for TigerStop and ± 0.3 mm for HeavyDuty • Working length: up to 9.2 meters for TigerStop and up to 24 meters for HeavyDuty • Pushing capacity: up to 80 kg for TigerStop and up to 600 kg...

Mecal TDC 622 Edge Master

• 3D sawing machine with saw blade diameter of 600 mm • Servo-controlled positioning: – Vertical axis: from -20º to +45º – Horizontal axis: from 90º to -45º • Maximum cutting length: 5,000 – 6,000 mm • Minimum cu...

DigiStop DigiSC IG OT 3000

• For automatic cutting of glazing bars, clamping frames and other small profiles • Feed table with infeed gripper with NC-controlled infeed gripper • Output table (optional with label printer) • Touchscreen moni...

Italyvacuum Fan Top

Particularly suitable for extraction with 1-head and 2-head sawing machines • Motor type: Fan • Motor power: 2.2 kW • Capacity of collection bin/bag: 172 litres • Extraction flow rate: 1,500 m3/h • Under pressure...

TigerStop SawGear

• Manufacturer: TigerStop

• Positioning lengths: 2.4 m – 3.6 m – 4.8 m – 6 m • Repeatability: +/- 0.2 mm • Maximum positioning speed: 38 m/min • Drive: 32 mm steel reinforced belt