Used Punch Presses in Connecticut, USA

Diamond Machine Tool Co. No 14 OBI Punch Press

Diamond Machine Tool Co. No 14 OBI Punch Press

US Industries OBI Press 75 Ton, 4" Stroke, 90 SPM

• Manufacturer: US

Item Specs: 75 Ton OBI 4" Stroke 15 3/4" Shut Height 3" Adjustment 90 Stroke per minute 36" x 27" Table oil pump has been removed There is no feed for it Was a good running press - needs oil pump Requires Rigger ...

Powair Press Feeds Model 1206 6" X 6" Size Air Feed 6" Stroke Rebuilt 11/2014

• Manufacturer: Powair

Model 1206 Max Strip Width 305mm or 12" Mas Strip Thickness 2.0mm or 1/32 (.0787)" Max Stroke 152mm or 6" Strokes/Min @ Max Stroke 70 Pulling power (supply at 6.8 Bar/100psi) 66kg Rebuil...

Minster No.6 6"Stroke 32"X 21"Bolster 60 Ton 30 SPM OBI Gap Type Stamping Press

• Manufacturer: Minster
• Model: NO6

Minster No.6 6"Stroke 32"X 21"Bolster 60 Ton 30 SPM OBI Gap Type Stamping Press Press Put In Storage For The Past 2 Years. Seller States Machine Was A Running Press At The Time It Was Removed For Storage. No Crac...

US-Baird 325 11 Operation Die Set 2" Pitch 24.5" Punch Holder W/Die Holders

• Manufacturer: U.S. Baird

US-Baird 325 11 Operation Die Set 2" Pitch 24.5 Punch Holder WDie Holders 11 Operations 2" Pitch 24.5" Punch Holder All Die Holders Included In Sale No Slide Or Transfer Cam US-Baird 325 11 Operation Die Set 2" P...

Pressmate PG-3 Mechanical 2 Row Stagger Feed

• Manufacturer: Pressmate

Max blank for single row 1.940 • 2 Row cutting saves 8% raw material • Halves the coil loading time – using double material width • Converts to single row as well • Chain drive from bottom shaft runs the motions ...

Asahi Seiki Brand TP45 US Baird Type 14 Operation Die Set 2.5" Center Distance

• Manufacturer: U.S. Baird

Asahi Seiki / US Baird TP45 Die Set In Excellent Condition Included Transfer Slide, Die holders 1.750" Diameter Die Holder Inside Bore 2.5" Tall Die Holders 5.75" Tall Die Height No Transfer Cam or Bolster Plate

US Baird MTP43-7/Asahi-Seiki TP45 Side Piercing / Motion Device Complete

• Manufacturer: U.S. Baird

US Baird MTP43-7/Asahi-Seiki TP45 Side Motion or Sied Piercing System Includes 2 Cams Mounting Bracket Necessary Bolts for Installation Complete set up for two die holder side motions Removed from Working Asahi-S...

US-Baird Model 325 15 Operation Die Set 1.5" Pitch No Slide Or Transfer Cam

• Manufacturer: U.S. Baird

US-Baird Model 325 15 Operation Die Set 1.5" Pitch No Slide Or Transfer Cam 15 Operations 1.5" Pitch Box Type Stripper Set Up Whistle Notch Round Punch Holder Ram Type Adjusting Screws In Ram No Slide No Transfer...

Waterbury Farrel Crank Eyelet 150-11 Eyelet Machine

• Manufacturer: Waterbury Farrel

Waterbury Farrel Crank Eyelet 150-11 Eyelet Machine 11 Operations Similar Chucks as 15 Size ICOP Air Clutch and Clam Shell Brake PA 7" Machanical Chopper 1 Stripper Fork Roll Feed Good Running Press 3.25" Stroke ...

US-Baird Model 325 15 Operation 1.5" Pitch Die Set W/Transfer Cam

• Manufacturer: U.S. Baird

US-Baird Model 325 15 Operation 1.5" Pitch Die Set W/Transfer Cam 15 Operation 1.5" Pitch Box Type Stripper Set Up Whistle Notch Punch Holder Type Round Punches W/Adjusting Screw To Adjust Depth Or Punches Asset ...

Waterbury Farrel 15 Size Roller Boxes, Plungers and Bottom Cams

• Manufacturer: Waterbury Farrel

• Roller boxes are good from 1510 presses – 50’s & 60’s vintage • Plungers are from 1510’s. Some long stroke and some short stroke. Some with customer holes or slot. • Bottom Cams – variety. Short stroker & long...

V&O 45ST Punch Press

• Manufacturer: V&O
• Model: 45ST

Good condition V&O 45ST Punch Presses manufactured in 1972. Located in USA and other countries. Click request price for more information.