Used Processing in New Jersey, USA

Carbon Steel - IPP# 212363

Hadfield carbon steel jaw crusher, jaw 400mm wide x 630mm high, belt driven by 20 hp, 3/50/400/440 volt, 720 rpm motor, mounted on c/steel baseplate, previous use glass cullet (pyrex)

Gear Reducer - IPP# 240151

• Manufacturer: Siemens

FDU1802/2415898 004 2KJ3111-1GA05-OFJ1-2 ZF129-K5-(320)

Gear Reducer - IPP# 71246

• Manufacturer: Western

Frame OD-60-HS

Gear Reducer 11.2 kW (15 HP) Carbon Steel - IPP# 46895

• Manufacturer: Falk

1170 rpm input, 1170 rpm output Has 3" dia x 5 1/4" output shaft and 1 3/4" dia x 3 3/4" long input shaft.

SEW-Eurodrive KA37DT100L4TH Gear Reducer - IPP# 230514

• Manufacturer: SEW-Eurodrive

Agitator Gear Motor Assembly 300 - 1300 rpm input Output is 13 - 300 rpm Service Factor 4.9 Torque 4204 lb-in SO number 390237369.04.04.001 Direct coupled to a SEW-Eurodrive motor 3/60/230/460 volt moto with dry ...

Gear Reducer 0.09 kW (0.12 HP) - IPP# 220421

• Manufacturer: HEYNAU

variable speed drive Germany drive data: 290V-500V, 50 Hz, 1.340 rpm, ex proof (T4).

Gear Reducer 0.12 kW (0.16 HP) - IPP# 220420

• Manufacturer: Getriebebau Nord

variable speed drive Germany drive data: 290V-500V, 0.12 kW, 50 Hz, 1.340 rpm CE confirmed.

Gear Reducer - IPP# 220418

• Manufacturer: SEW-Eurodrive

Germany weight 35.8 kg, no motor.

Gear Reducer SEW-Eurodrive R87/A - IPP# 220415

• Manufacturer: SEW-Eurodrive

50 rpm to 1.400 rpm variable speed drive Torque: Nm~1.550 driven by SEW-EURODRIVE motor, data: 290-500V, 2.0 kW, 50 Hz, 1.400 rpm, ex proof (T3).

Gear Reducer - IPP# 220411

• Manufacturer: ESSO

variable hydraulic speed drive with 2.5 kW LOHER motor 3/50/380 volt, 1420 rpm, ex proof (T3)

Gear Reducer Carbon Steel - IPP# 217918

• Manufacturer: SEW-Eurodrive

flat gear box with motor 3~/50Hz/380-660V/1460:79rpm insulation class F, IP54.

Gear Reducer - IPP# 211814

• Manufacturer: Reeves

infinitely variable gear reducer (Mick Reeves) without agitator

Gear Reducer - IPP# 211808

• Manufacturer: Reeves

200-1000 rpm infinitely variable gear reducer (Mick Reeves) without pump With 1,3 HP/500 V/50 Hz/1410 rpm ex proof B.B.C. E-Motor, type MUFA 90 S 4, serial number A 794`027

Gear Reducer 720 kW (965.5 HP) Carbon Steel - IPP# 210480

• Manufacturer: BHS Voith

965 HP Input shaft 2" , output shaft 4"

Gas Generator 42.5 m3/h (25 CFM) - IPP# 103367

• Manufacturer: PCI Ozone Corp

50 lbs/day 25 scfm ozone generator Rated concentration 2% by wgt Dryer purge rate 4.5, air pressure 15 psi. Input power 3/60/460 volt Dewpoint -60 deg F or lower Required cooling water 8 gpm @ max temp of 70 deg ...