- Trusted Seller

RENOPOWER BD5.5-200-10-T
- Manufacturer: RENOPOWER
Capacity [m³/min]: 0.598 | Pressure [bar]: 10 | Tension [v/ph/hz]: 380/ /50 | Engine: Electrical / 2 cyl. 850 rpm | Remarks: Tank Cap. 200 liter | Weight [kg]: 170 | Power [kw]: 4 (hp 5.5) | Outside condition: E...
Waregem, Belgium - Trusted Seller

1995 ATLAS COPCO GA90
- Manufacturer: Atlas-Copco
- Model: GA 90
Capacity [m³/min]: 16.2 | Pressure [bar]: 7.5 | Tension [v/ph/hz]: 400/3/50 | Weight [kg]: 2917 | Power [kw]: 90 | Ce mark: ok | Length [m]: 2.70 | Width [m]: 1,52 | Height [m]: 2.00
Waregem, Belgium - Trusted Seller
Gasing unit LÜBER LW-FDA-825; 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter
Amel, Belgium - Trusted Seller
Gasing unit LÜBER LW-FDA-425; 4kW
- Manufacturer: Lüber
- Model: LW-FDA 425
With 4 kW heating Max. core weight 15 kg (± 10 l) With contactor control and stainless steel storage tank 30 l Compressed air connection 1" Compressed air control via proportional valve With micro pump, gas dosin...
Amel, Belgium - Trusted Seller
Treatment ladle ACETARC 500kg
- Manufacturer: ACETARC
External dimensions: Length: 1400 mm; Width: 700 mm; Height: 2000 mm Usable dimensions: Ø550 mm; Depth: 1120 mm Without Refractory
Amel, Belgium - Trusted Seller
Electrical tiltable furnace MORGAN ±600kg Alu
- Manufacturer: Morgan
External dimensions: Length: 1800 mm; Width: 2400 mm; Height: 1900 mm With control cabinet
Amel, Belgium - Trusted Seller
Shake out for furan sand 1000x 1000mm BMF
- Manufacturer: BMF
External dimensions: Length: 3150 mm; Width: 1460 mm; Height: ±1400 mm With control system With 1 spare part motor With dust extraction wall
Amel, Belgium - Trusted Seller
Tumble belt shot blast machine with rubber belt RUMP CUBESTA ECO 200 new
- Manufacturer: Rump
Dimensions: Height: 4000 mm Foundation-free installation Pneumatic chamber door With 1 R320 blasting turbine; 7.5 kW Part weight: max. 20 kg; max. part dimensions: Ø300 mm With abrasive collection tray With abras...
Amel, Belgium - Trusted Seller
2013 tilting melting furnace NABERTHERM, K80/12 for tin,lead,zinc etc
- Manufacturer: Nabertherm
Outside dimensions: width 1800mm, depth 1700mm, height ± 1500mm Wiith hydraulic tilting equipment With control board Withj new crucible
Amel, Belgium - Trusted Seller
Ladle for melting and holding HINDENLANG 600kg
- Manufacturer: Hindenlang
With control cabinet With Odermath gearbox With suspension for crane transport
Amel, Belgium - Trusted Seller
Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM
- Manufacturer: Inductotherm
Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
Bottom pouring unit for ladle
Length: 1950mm; Width: 700mm Centre distance stopper rod - lever: 565mm | Weight: ±160kg
Amel, Belgium - Trusted Seller
Treatment ladle SOPAME ±3t
- Manufacturer: SOPAME
Useful dimensions: Ø800mm, height: ±1400mm With 2 pouring spouts With heat protection With 2 lifting anchors at the corners of the swivel arm With oil bath worm gearbox
Amel, Belgium - Trusted Seller
Gassing unit LAEMPE - LG15 CB
- Manufacturer: Laempe / Röperwerk
With display for operating pressure, flushing pressure and operating pressure valves
Amel, Belgium 
Atlas-Copco GA 1107.5 Industrial Compressor
- Manufacturer: Atlas-Copco
- Model: GA 1107.5
Good condition Atlas-Copco GA 1107.5 Industrial Compressors available between 1986 and 1991 years. Located in Belgium and other countries. Click request price for more information.
Belgium

