Used Presses

50 TON DENISON "MULTIPRESS" EXTRA-HIGH GAP-FRAME HYDRAULIC PRESS w/36” DAYLIGHT - 31” X 20” BOLSTER

• Manufacturer: Multipress

50 TON DENISON "MULTIPRESS" EXTRA-HIGH GAP-FRAME Imperial Metric HYDRAULIC PRESS Serial No 18348, Model NA50C95DO2A129KO SPECIAL Shop Order 92190A EQUIPPED WITH: 36" Daylight 31" x 19.75" T-Slotted Bolster Plate ...

1991 AIDA, TWO POINT, STRAIGHT SIDE, LINK MOTION PRESS 220 Ton capacity, MODEL PMX-L2-200

• Manufacturer: Aida
• Model: PMX-L2-2001

DIE HEIGHT TO TOP OF BOLSTER (SDAU): 18.7" DIE HEIGHT ADJUSTMENT (MOTORIZED): 3.93" If you can't find the exact pre-owned machine you're looking for in our current inventory, don't worry! We're here to help. Simp...

25 Ton x 2-1/4″ YODER P 25 Cut-Off Press #4094

• Manufacturer: Yoder
• Capacity: 25,000 kilogram

4094 YODER P25 Y5075-167 Control Panel Motor Die Set 4′ x 3′ x 5′ 2,000 Lbs. Universal Warehouse, Perrysburg, Ohio Our inventory is always changing, contact us for assistance in locating the machinery that suits ...

100 Ton Minster SSDC Press Z21008A

• Manufacturer: Minster
• Model: P2-100

Double Lock Up Ram Stroke: 3" | Powered ram adjustment: 4" Non Powered | Shut height: 13.5" | Strokes per minute: 0-200 | Ram area: 40.5" x 19" | Bed area: 42" x 31.5" | Air clutch and brake: yes | Air counterbal...

330 Ton Komatsu SSDC Press Z21017

• Manufacturer: Komatsu
• Model: E2G300

Stroke: 17.7" | Powered ram adjustment: 7.87" | Shut height: 16.69" Over the Bolster | Strokes per minute: 15-25 | Ram area: 74.80" LR x 49.2" FB | Bed area: 82.67" LR x 53.14 FB x 7.08" Thick Bolster | Air clut...

150 TON BIPEL SINGLE POST HYDRAULIC PRESS. #0902416

• Manufacturer: Bipel

SPECIFICATIONS: 150-Ton BIPEL Press Capacity 150-Ton Max. Table Size Left to Right btwn Stop Plates: 28" Main Ram Pull back force - 150 Tons Main Ram Pull back force at circuit pressure: 4.8 tons Ejection Force ...

1986 AIDA, TWO POINT, STRAIGHT SIDE, LINK MOTION PRESS 220 Ton capacity, MODEL PMX-L2-200-UJ

• Manufacturer: Aida

DIE HEIGHT TO TOP OF BOLSTER (SDAU): 19.6" DIE HEIGHT ADJUSTMENT (MOTORIZED): 6.1" If you can't find the exact pre-owned machine you're looking for in our current inventory, don't worry! We're here to help. Simpl...

Brown Trim Press, Model T-300

• Manufacturer: Brown
• Model: T-300

Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.

150 Ton Greenerd Hydraulic Press Z20056B

• Manufacturer: Greenerd
• Stroke length: 254 millimeter
• Daylight: 482.59999999999997 millimeter

T Slotted Ram And Bolster 8 Point Gibbing 41.5" Pass Line Height

75 TON NEFF HYDRAULIC PRESS Z21047F

• Manufacturer: Neff
• Model: DF75-15M
• Stroke length: 254 millimeter
• Daylight: 609.5999999999999 millimeter

230/460/60/3 Stroke: 10 inches | Daylight: 24" | Ram size: 4.5" x 5.5" | Bed size: 31" x 23" | Throat: 10" | Floor sanding: yes | Motor hp: 15 | Maximum operating presssure: 3000 PSI | Reservoir capacity: 150 GAL...

1987 30 TON SANKISEIKO "SDP1007-30TA/F180" STRAIGHT-SIDE HYDRAULIC REVERSING-TYPE DIE & MOLD SPOTTING TRYOUT PRESS w/28” X 40” TRAVELING TABLE - EJECTOR

30 TON SANKISEIKO "SDP1007-30TA/F180" STRAIGHT-SIDE Imperial Metric HYDRAULIC REVERSING-TYPE DIE & MOLD SPOTTING/TRYOUT PRESS New 1987, Serial No 6211385, Model SDP1007-30TA/F180 EQUIPPED WITH: Straight-Side Fram...

100 Ton Greenerd Hydraulic Press Z20029

• Manufacturer: Greenerd
• Model: HCT 100
• Stroke length: 254 millimeter
• Daylight: 21.75 millimeter

Stroke: 10 inches | Daylight: 21.75 | Ram size: 32" x 27" | Bed size: 32" x 27" | Bolster thickness: 4 inches | Windows: 14 inches | Floor sanding: yes | Motor hp: 30 | Approximate weight: 14000 | Approximate di...

75 TON NEFF HYDRAULIC PRESS Z21047G

• Manufacturer: Neff
• Model: DF75-15M
• Stroke length: 254 millimeter
• Daylight: 609.5999999999999 millimeter

Stroke: 10 inches | Daylight: 24" | Ram size: 4.5" x 5.5" RAM THREAD | Bed size: 31" x 23" | Throat: 10" | Floor sanding: yes | Motor hp: 15 | Maximum operating presssure: 3000 PSI | Reservoir capacity: 150 GALL...

300 Ton Pacific Pressformer Hydraulic Press Z21027A

• Manufacturer: Pacific
• Model: 300 PF II
• Stroke length: 508 millimeter
• Daylight: 939.8 millimeter

Palm Buttons 44.5" Passline T Slotted Ram And Bolster 34" Between Side Frames