Used Presses in Germany

Trusted Seller
2004 Alphatech RPS4000
- Manufacturer: Alphatech
2004 Alphatech Model RPS4000 Description: Electro-hydraulically driven frame press Series: Type:RPS 4000 Date of manufacture:12.2003 plunger force From approx. 4000 kN kN plunger force Up to approx. 916 kN ...
Stuttgart, Germany
Trusted Seller
1992 Lauffer 400 T
- Manufacturer: Lauffer
Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical D...
Stuttgart, Germany
Trusted Seller
1990 Liebergeld G400
- Manufacturer: Liebergeld
Liebergeld Li-transmatic Colombo Agostino for sale. Year of build 1990 Model G 400/1100/250/5 Nominal pressing force: 4000 KN Stroke : 250 mm Infinitely variable stroke rate: 20 - 60 1/min Table top usable,...
Stuttgart, Germany
Trusted Seller
1988 Bruderer DWP R07 25N
- Manufacturer: Bruderer
Find more here - https://www.ucymachines.com/ Contact us at - sales@ucymachines.com
Stuttgart, Germany
Trusted Seller
2020 TOX CBM 004.025.001.a.007
- Manufacturer: TOX
TOX pressotechnik CBM 004.025.001.a.007 Find more here - https://www.ucymachines.com/ Contact us at - sales@ucymachines.com
Berlin, Germany
Trusted Seller
ASUTEC separating stop
Separating stop, single-acting, damped ASUTEC ASM-160-EW-09-I-100 upper part moves approx. 9 mm downwards during operation (spring return) used, tested !
$175 USD
Zschepplin, Germany
Trusted Seller
GEPPERT mixer
Stirrer, agitator GEPPERT Type SPR 4/3,0 Material: Stainless steel Motor: MOLL-MOTOR type Y3PE-100LB4 B5 Z-UFDK 3.0 kW 1440 rpm 230 / 400 V 3AC 50 Hz 60 Hz - Operation is possible ! IP 55 New !
$1,344 USD
Zschepplin, Germany
Trusted Seller
WMW clamping drive
- Manufacturer: WMW
Clamping drive, clamping force generator, electric, WMW SgB 400 Hollow shaft: square profile 22 x 22 mm, depth: 45 mm 4x bore: Ø 8 mm, 2x bore: Ø 10 mm Motor: KR 71 z/4 0.4 kW 1380 rpm 220 / 380 V 3AC 50 Hz IP44 ...
$409 USD
Zschepplin, Germany
Trusted Seller
1990 SCHMID 51-320
- Manufacturer: Schmid
Manufacturer: SCHMID Model : 51-320 Year of Manufacture: 1990 Press Force (Total): 3200 kN (≈ 320 tons) Ring Rack Force: 1500 kN Counterforce: 550 kN Maximum Pressure: 320 bar Hydraulic Oil Capacity: 1500 ...
Ulm, Germany
Trusted Seller
1986 HYDRAP HPDZB 160
- Manufacturer: HYDRAP
Manufacturer: HYDRAP Model: HPDZB 160 Year of Manufacture: 1986 Type of Machine: Hydraulic Press Nominal Force: 178 kN Stroke Length: 500 mm Voltage: 380 V Frequency : 50 Hz Nominal Power: 17.5 kW Curren...
Nuremberg, Germany
Hunkeler ADP 45-70
- Manufacturer: Hunkeler
Double spindle press Hunkeler ADP 45-70 Double plate pressing 45x70cm, above or below, spindle guided on both sides 380 volt for pressing the books with cardboard cover after hanging, or to be used as a smoothing...
Dabergotz, Germany
1981 sperr & Lechner Splek SLF II A 200 S
- Manufacturer: sperr & Lechner
FNP electric folding low pressure press SLF II A 200 from year of manufacture 1981 Description: The folding low-pressure press is used to press off the fold on the spine of the book and has two pressing stations ...
Dabergotz, Germany
1991 Peter van Ginkel L-90 Motor
- Manufacturer: Van Ginkel
Motor driven lithography press Peter van Ginkel L-90 motor Year of manufacture 1991 Previous owner was the Academy of Visual Arts Leipzig Paper size 900 x 1,500 mm, Machine dimension L 2670 x W 1.400 mm wide, Wor...
Dabergotz, Germany
Trusted Seller
2008 Tox Pressotechnik MAG 075.222.A.001
- Manufacturer: TOX Pressotechnik
Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total...
Munich, Germany
Trusted Seller
1995 AMADA Arcade 210
- Manufacturer: Amada
- Model: ARCADE-210
Type of machine: CNC punching and nibbling machine / CNC punch nibbler
Windhagen, Germany