Used Presses in Germany

2018 KBA RA 106-8 SW4 FAPC SIS SPC

1975 HEIDELBERG SGS

• Manufacturer: Heidelberg

1981 FRITZ MUELLER CR 40.1.11 1113-2100093

• Manufacturer: Mueller

Control type: conventional | Freight basis: FCA | Pressure: 40 t | Interruptores automáticos y seccionadores: mm | Hub: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

Column frame

Additional information Used column frame with 2 guide columns Further information Weight: with threaded hole for M 24 x 1.5 mounting pin

2001 Staufermatic Type 112

• Manufacturer: Staufermatic

Serial No.: M-1971 Control Siemens Simatic OP17

1996 DUNKES HZ 6,3 1113-24017

• Manufacturer: Dunkes
• Model: HZ 63

C-Type 1 Station Control type: conventional | Freight basis: FCA | Pressure: 6,3 t | Discharge: 170/180 mm | Hub: 310 mm | Drive power: 3 kW | Installation height: 775 mm | Machine weight approx.: 1,5 t | Worktab...

1982 DUNKES HZT 2,5 1113-23050

• Manufacturer: Dunkes
• Model: HZT 25

Control type: conventional | Freight basis: FCA | Pressure: 2,5 t | Discharge: mm | Hub: mm | Total power requirement: kW | Machine weight approx.: t | Space requirement approx.: m

BRUDERER BSTA 50 HL

• Manufacturer: Bruderer
• Model: BSTA 50 HL
• Shut height: 300 millimeter

Press is already dismantled Press capacity: 50 ton | Ram stroke adjustable: 16 - 51 mm | Slide adjustment: 78 mm | Shut height (stroke down, adjustment up): 300 mm | Table surface area: 930 x 590 mm | Number of s...

1980 KAISER V 50 W

• Manufacturer: Kaiser
• Model: V 50 W
• Stroke length: 54 millimeter
• Shut height: 303 millimeter

IMCO Press force measurement Grip Feeder, Type ZR18ZT1 Max. Sheet width 180 mm Feeding length 150 mm Press has been overhauled in 2003 through Kaiser Co.

1986 KAISER KP 35

• Manufacturer: Kaiser
• Model: KP 35
• Shut height: 250 millimeter

Before delivery Press gets a new PLC. Press capacity: 35 ton | Ram stroke adjustable: 6 - 50 mm | Slide adjustment: 50 mm | Shut height (stroke down, adjustment up): 250 mm | Free frontal opening l-r: 430 mm | Ta...

1997 RASTER ZEULENRODA HR 315 / 1600 - NL / RK

• Manufacturer: Raster
• Shut height: 370 millimeter

The press was converted to CE standard in 2015. The press was converted to a SIEMENS S7 control system. The conveyor system still has a SIEMENS S5 control system. Die lifters in the table Feeding unit KEMMERICH c...

2004 PME ZH 1600 / 1500 Optimotion

• Manufacturer: PME
• Daylight: 560 millimeter

Control system SIEMENS S7 PME feeding unit consisting of decoiler and feed / straightening unit Decoiler Load capacity 2 t Strip width 400 mm Material thickness 0.5 - 4.5 mm Coil outer diameter 1800 mm Spreading ...

1986 KAISER V 63 W / 860

• Manufacturer: Kaiser
• Model: V 63 W 860
• Shut height: 300 millimeter

Die lifters with balls for die change IMCO Press force measurement Grip Feeder, Type ZR 250 Max. Sheet width 250 mm Feeding length 210 mm

1982 RASTER HR 45/700 NL

• Manufacturer: Raster
• Shut height: 300 millimeter

With gripper feed Machine was completely overhauled in 2001 with SIEMENS S7 control.

1989 DUNKES HZS 250

• Manufacturer: Dunkes
• Model: HZS 250
• Stroke length: 300 millimeter
• Daylight: 500 millimeter

Hydraulic C-Frame presses Press capacity: 250 ton | Throat depth: 430 mm | Stroke: 300 mm | Daylight: 500 mm | Table surface area: 1.100 x 850 mm | Slide area: 1.100 x 850 | Table height over floor: 950 mm | Appr...