Used Post Press in Brandenburg, Germany

2008 Muero 5000 A4 WT

• Manufacturer: Müro

mobile base Hot air blower drying Heat sheet for uniform drying and press insert for smaller stacks Holding capacity for A 4 stacks Gluing of form sets or brochures DIN A 5 Stacking height: 50 cm Press width: 35 ...

2010 AKM PSA 60

• Manufacturer: AKM

mobile prefold delivery flat pile delivery AKM PSA 60 Pharma with press from yr. 2010 Product format min. 90 x 60 x 0.5mm Product format max. 300×600 x 8.0mm Speed 32-180m/min. 2 pairs of press rolls Pressing pre...

2002 Ernst Nagel Morgana NUMNAK-S / FSN

• Manufacturer: Morgana
• Model: FSN

- ideal for numbering glued SD sets - complete with feeder suction and blowing air in basic equipment - 1 Paint roller - 1 piece numbering shaft - 2 pieces seat rings - 2 rotary numbering units With its suction f...

2006 Busch SE 125 RLA

• Manufacturer: Busch
• Model: SE 125 RLA

very little used for turning, aerating, jogging and aligning Max. Sheet size mm 800 x 1200 Max. Stacking height mm 1350 Min. stacking height mm 380 Platform width mm 1250 Platform depth mm 900 Load capacity kg 10...

JBI James Burn International K 50 electric Wire-O punching machine

• Manufacturer: James Burn - JBI

JBI James Burn International K 50 electric Wire-O punching machine max. punching width 500mm

2004 Busch SWH 180 Le

• Manufacturer: Busch
• Model: SWH 180

VLF sized 7-format (KBA Rapida 162 and Roland 900 XL) Pile turner Busch SWH 180 Le year 2004 - with pressure relief flaps - with 4 strong adjustable air nozzles - tub 1220×1620 mm - opening width 1600 mm The unit...

2011 H&H Herzog & Heymann, MBO F 76 Solo, H&H 381

• Manufacturer: Herzog+Heymann

Flat pile feeder MBO F 76 Solo with independent drive for max. format of 72 x 102 cm. built 2011 from MBO are designed specifically for use in workplace environments that have frequently changing finishing requi-...

Punching tool Renz DTP 340 6mm pitch 2to1

• Manufacturer: Renz
• Model: DTP 340

2001 GBC AP-2 Ultra

• Manufacturer: GBC
• Model: AP2

with a tool rectangle 8,3x3mm for plastic binding

2012 Uchida / ATS Tanner ATS-MS 420 S

• Manufacturer: ATS
• Model: MS 420

The device is suitable for sensitive products up to A3 format, is immediately ready for operation and requires no heating time. Short front table for small formats Heat seal unit for paper and film tapes Micropro...

Punching tool for Renz DTP 340 and Renz DTP 340 M in pitch 21 with 6mm round hole

• Manufacturer: Renz
• Model: DTP 340

Punching tool for Renz DTP 340 and Renz DTP 340 M in division 2:1 with 6mm round hole

2012 Christian Renz DTP 340

• Manufacturer: Renz
• Model: DTP 340

Powerful punching system for punching and perforating paper up to 340 mm working width. With foot switch and vertical paper feed. Punching capacity up to 35 sheets (depending on the tool). Universally applicable ...

2010 Morgana / Ernst Nagel 8000

• Manufacturer: Morgana
• Model: 8000

This underfloor suction feeder with alignment table has a capacity of up to 5500 sheets/h. The Universal Feeder is height adjustable and can be set to the required height of the connecting device. A fully flexibl...

2011 Duplo FKS Docucutter DC 615 Pro

• Manufacturer: Duplo
• Model: DC-615

incl. Duplo Job Creator Software Finisher for digital color prints Edge trimming, panel cutting, creasing of color digital prints in one pass for business cards, folded business cards, greeting cards, folding car...

1994 Baumann BSW-P

• Manufacturer: Baumann
• Model: BSW-P

Platform inner dimension 850 x 1370 mm max. opening 1345mm min. Opening 620mm Stacking weight max.1000 kg Manual handling of paper, cardboard or similar materials takes time and effort and is therefore very cost-...