- Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre c...
Leipzig, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 used !
$174 USDZschepplin, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 New !
$197 USDZschepplin, Germany - Trusted Seller
tiene eje con etiqueta
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 40 x 315 ( 40x40x315 ) SK40 used, tested !
$290 USDZschepplin, Germany - Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 27 x 315 ( 40x27x315 ) SK40 used, tested !
$209 USDZschepplin, Germany - Trusted Seller
1978 Hurth Maschinen-und Zahnradfabrik LF 1000
- Manufacturer: Hurth
- Power requirement: 8.4 kilowatt
wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55...
Leipzig, Germany - Trusted Seller
1980 WMW FSS 250x1000
- Manufacturer: WMW
- Model: FSS 250X1000
additional features: -Table adjustment via machine see X/Y and Z data -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates
Leipzig, Germany - Trusted Seller
1995 WAGNER UF1
- Manufacturer: Wagner
- Power requirement: 4.6 kilowatt
The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm
Leipzig, Germany - Trusted Seller
spothinten
- Manufacturer: Pagus
Tilting table, clamping table, milling table PAGUS Clamping surface: 205 x 145 mm approx. -10° to +190° tiltable used, tested !
$174 USDZschepplin, Germany - Trusted Seller
1984 WMW FUW 315/5
- Manufacturer: WMW
- Model: FUW 315/5
- Power requirement: 7.4 kilowatt
Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: ...
Leipzig, Germany - Trusted Seller
1980 WMW "FRITZ HECKERT" FU 315 V/2
- Manufacturer: Heckert
Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x...
Leipzig, Germany - Trusted Seller
1990 Emco VMC-100
- Manufacturer: Emco
- Power requirement: 0.8 kilowatt
EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door ...
Leipzig, Germany - Trusted Seller
WMW FH
- Manufacturer: WMW
Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included.
Leipzig, Germany - Trusted Seller
SECO cutter arbor
- Manufacturer: Seco
Cutter arbor, tool holder SECO, EPB E9306557104012 Tool holder: Ø 40 mm, length: 40 mm, wedge width: 10 mm New !
$209 USDZschepplin, Germany - Trusted Seller
Leipzig, Germany
Tip: Enter manufacturer, model or keyword