Used Material Handling in Germany

Trough chain conveyor #23778

with gearbox (suitable motors in stock) used very stable trough chain conveyor TKF Reedler 11,8 meter was used for coal, can also be used for other products grain sand etc. capacity up to 300 to /H possible with ...

Trough chain conveyor #23777

with drive motor/gearmotor SEW Eurodrive used very stable trough chain conveyor 13,5 meter heatable was used for coal 1380/3,4 rpm kW 0,55 / Nm 1800 230/400 V ; 3,05/1,75 A ; 50 Hz -This trough chain conveyor is ...

3x roller tables roller table 6250 mm #B12388

1x length approx. 2250 mm 2x length approx. 2000 mm Conveyor width approx. 530 mm roller tables roller table roller table not driven roller table roller table used 3 pieces frame width approx. 650 mm frame height...

Honing T250

• Manufacturer: Honert

progressive thread solid trough screw, screw conveyor used without drive motor, but can be offered with, also overhaul. Changes and errors in the technical data, specifications and prices as well as prior sale re...

Chip conveyor Wire conveyor Scraper conveyor Apron conveyor 1,3 + 0,8 + 0,6m with coolant pump #B11809

lower belt length approx. 1300 mm pitch approx. 800 mm upper belt length approx. 600 mm chip conveyor plate conveyor with liquid tray used ejection height approx. 800 mm belt width 140 mm with pump and gear motor...

massive TKF trough chain conveyor Redler heatable coolable 6,7m 1 to 250 to/H #27651

Trough width inside approx. 450 mm Trough depth inside approx. 400 mm distance between flights 280 mm The trough chain conveyor is offered tested and newly primed. center inlet - center outlet approx. 5100 mm dis...

Trough chain conveyor 60-80 t/H #B11096

Lengths from 5 to 50 meters Inside width approx. 280 mm inner height approx. 400 mm Trough chain conveyor approx. 60-80 to/h used trough lengths from 5 to 50 meters possible trough inner width approx. 280 mm inne...

Pipe screw approx. 3 m Ø approx. 260 mm #B15997

Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, grain or similar materials conveying length (from inlet to outlet): approx. 3 m pitch approx. 250 mm spiral height appr...

Vibrating feeder, vibrating feeder 85 cm #B16554

Manufacturer RW Beier GmbH overall dimensions approx. 850 x 350 x 350 mm Vibratory feeder, vibrating feeder, magnetic vibrating feeder, vibratory feeder for dosing and separating bulk material used trough approx....

WITTMANN NFMXB315 PTVMS3

• Manufacturer: Wittmann

WITTMANN NFMXB315 PTVMS3 Vacuum Conveyor (Used) This used vacuum conveyor is from the manufacturer WITTMANN , type NFMXB315 PTVMS3 Technical Specifications Manufacturer: Type: Serial Number (HAN): W30004469 Vo...

Trough auger 4.20 m made of stainless steel #K17392

Trough length 4200 mm Trough width 330 mm Motor defective, can be replaced Stainless steel screw conveyor Spiral pitch 300 mm Spiral height 90 mm Helix thickness 4 mm Shaft Ø 120 mm Outlet 330x400 mm at the front...

Trough auger 3.40 m stainless steel #K17394

Trough length 3400 mm Trough width 330 mm without motor Stainless steel screw conveyor Spiral pitch 150 mm Spiral height 90 mm Helix thickness 5 mm Shaft Ø 120 mm Outlet Ø 330 mm on motor side Overall dimensions ...

Trough auger 3.4 m stainless steel #K17393

Trough length 3400 mm Trough width 430 mm without motor Stainless steel screw conveyor Spiral pitch 400 mm Spiral height 135 mm Helix thickness 4 mm Shaft Ø 120 mm Outlet 430x400 mm on both sides Overall dimensio...

Stainless steel trough auger 4 m #K17397

Trough screw conveyor, screw conveyor used Diameter: Ø approx. 400 mm blade thickness approx. 4 mm Outlet approx. 430 x 430 mm stainless steel Dimensions approx. 5100 x 540 x 500 mm On request, we can add a geare...