Used Machine Tools in Brandenburg, Germany

Kjellberg iQ-Series

• Manufacturer: Kjellberg

Power source: iQ 1500iQ 1500 plus | Cutting currentat 100% d.c.1: 20 - 150 A | Marking currentat 100% d.c.1: 5 - 60 A | Cutting ranges: iQ-Gas O2 | Mild steelrecommendedmaximumpiercing: 0,5 - 40 mm60 mm35 mm | S...

Kjellberg KSI 1000

• Manufacturer: Kjellberg
• Amperage: 1,000 ampere

Power source: KSI 1000 | Mains voltage: 3/PE AC 50/60 Hz, 400 V ±10 % | Connected load at 100% duty cycle: 51,5 kVA | Fuse: 125 A (80 A or 100 A also possible) | Welding current range: 80 – 1000 A / 18 – 44 V DC...

1992 Soraluce FSR 8000

• Manufacturer: Soraluce

2000 HANS SCHöN UTE FF 300

• Manufacturer: HANS SCHöN

300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction J51...

Kjellberg FIDUR 2/55

• Manufacturer: Kjellberg

The electrode Fidur 2/55 is designed for very hard and tough surfacings on heavily wear-loaded machine parts from unalloyed and low-alloyed metals. It is especially suited for repairs and manufacture of cold cutt...

Kjellberg FIDUR 10/70

• Manufacturer: Kjellberg

The high-performance electrode Fidur 10/70 is ideal for surfacings on tools and machine parts which are exposed to extreme abrasion under high temperatures. This stick electrode is suitef for surface and repair w...

Kjellberg FINOX 29/9 GOLD

• Manufacturer: Kjellberg

The electrode Finox 29/9 is an electrode for extremely crack-resistant and durable joint and surface welding on difficult-to-weld steels, i.e. high-manganese steel, tool steel and spring steel as well as for mixe...

Kjellberg FIDUR 3/50

• Manufacturer: Kjellberg

Fidur 3/50 is an electrode for the repair of hot-working tools from steels of the same grade, for example forging dies, press jacks, hotdraw rings, hot-cutting and hot-upsetting tools from unalloyed and low-alloy...

Kjellberg FIDUR 4/60

• Manufacturer: Kjellberg

The electrode Fidur 4/60 is suited for hard, wear-resistant surfacings with high toughness. It is used for armouring of cutting edges on tools from low-alloyed steel and for repairs on high-speed tools. The weld ...

Kjellberg FINOX 4337 AC

• Manufacturer: Kjellberg

The electrode Finox 4337 AC is suited for joint and surface welding on steels and cast steel types of the same or similar alloy, for joint welding on high-tensile unalloyed and low-alloyed construction steels, he...

Kjellberg InFocus 500

• Manufacturer: Kjellberg

With its compact design and excellent electrode cooling, the high-performance TIG torch InFocus 500 is the unbeatable tool for an extremely stable arc in cases of restricted accessibility. With a diameter of only...

Kjellberg FIDUR 10/65

• Manufacturer: Kjellberg

Fidur 10/65 is a high-performance electrode for highly wear-resistant surfacings on machine parts which are exposed to strong grinding load. Through higher carbon and chromium content a high hardness and good wea...

Kjellberg HiFocus 440i neo

• Manufacturer: Kjellberg

The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means considerably higher flexibility. The inverter t...

Kjellberg HiFocus 360i neo

• Manufacturer: Kjellberg

The HiFocus 360i neo is one of the most flexible and most powerful high-precision plasma cutting units. Its wide cutting range from 0.5 mm to 80 mm means a considerably higher flexibility. The inverter technology...

Kjellberg FIDUR 350

• Manufacturer: Kjellberg

The electrode Fidur 350 is suited for surfacing on machine parts made from unalloyed and low-alloyed metalls and which are subject to roll and rolling contact wear with dragged or crushing load, e.g railways, swi...