Used Machine Tools in Saxony, Germany

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

WMW dividing head

• Manufacturer: WMW

Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) dividing head: mounting: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diamet...

1999 WMW 5500x1500x250

• Manufacturer: WMW

- distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps i.D.

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW 800x300

• Manufacturer: WMW

surface plate does have holes! Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 800 mm | Table width: 300 mm | Table height: 130 mm | Weight...

WMW 660x450

• Manufacturer: WMW

fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm

WMW AP 4000x2000x310

• Manufacturer: WMW

Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D.

WMW AP 3000x1775

• Manufacturer: WMW

Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longi...