Used Machine Tools in Minnesota, USA

Letter, Number, Hole Transfer Punches

Lot 152 Letter, Number, Hole Transfer Punches Main unit approx weight: 0.00 lbs | Main unit dimensions (in inches): Length: 0.00"  Width: 0.00"  Height: 0.00" | Dock door: 12' x 14' H Door Ground Level Doors | Lo...

Pry Bars, Hammers, Deadblow Hammers

Lot 61 Pry Bars, Hammers, Deadblow Hammers Main unit approx weight: 0.00 lbs | Main unit dimensions (in inches): Length: 0.00"  Width: 0.00"  Height: 0.00" | Dock door: 12' x 14' H Door Ground Level Doors | Loadi...

Redline RC5HC12500320

• Manufacturer: Redline

Heimatec 8-030-55-037

• Manufacturer: Heimatec

Like New, Dealer Demo Fits Nakamura Models TW10, WT150, WTS150, WT250, SC150, SC250, Super NTJ, Super NTM3, Super NTJX, TMC18

Unused Madison Cutting Tools 2212-505-00875 1" Double Edge Tool Holder Insert

• Manufacturer: Madison Cutting Tools

Unused Madison Cutting Tools 2212-505-00875 1" Double Edge Tool Holder Insert Unused Madison Cutting Tools 2212-505-00875 1" Double Edge Tool Holder Insert Click images to enlarge Description INV 5293 Unused Madi...

2015 CZM EK200

• Manufacturer: CZM
• Model: EK200

Includes CFA kit! Price just reduced! Hours/mileage: 5,054 as of 6/24 | General condition: Good

Air Hoses, Tubing, Fittings and Supplies

Lot 196 Air Hoses, Tubing, Fittings and Other Supplies

Angle Drill & Heat Gun...

Angle Drill & Heat Gun

Corded Electric Tools

Josef Kihlberg Pneumatic Box Staplers (6) w Staples

• Manufacturer: Josef Kihlberg

Lot 484 Josef Kihlberg Pneumatic Box Staplers (6) w Staples

Bosch Hammer Drill

• Manufacturer: Bosch

Lot 2 Bosch 1/2" Cordless Hammer Drill, 18V with Case, (3) Batteries, (2) Chargers

2006 IMT AF220

• Manufacturer: IMT
• Model: AF220

New engine! - New engine, pump and final drive work done at 11,400 hours at Ziegler CAT - Fresh 2,000-hour service, boom articulation repin and bushed at service. All oil samples available. - 4 x x48-M Kelly ...

Buck 8" 4-Jaw Chuck w/ Key and Removable Flat Back Mounting Plate

• Manufacturer: Buck

Buck 8" 4-Jaw Chuck w/ Key and Removable Flat Back Mounting Plate Buck 8" 4-Jaw Chuck w/ Key and Removable Flat Back Mounting Plate Click images to enlarge Description INV 6998 Buck Chuck 8" 4 Jaw Chuck with Chuc...

2008 IMT AF180

• Manufacturer: IMT
• Model: AF180

New engine recently! - The rig has had extensive work done, including a new engine at 11,220 hours, as well as regular maintenance - 4 x 20-M Kelly - 65-ft max drill depth - This rig is still drilling for the...

SHRINK FIT UNIT w/COOLANT TANK

• Manufacturer: Erickson

One induction coil 3 to 32 mm (1/8 to 1-1/4 in) Dia Four heating coil stop plates covering range of 3 to 32 mm (1/8 to 1-1/4 in) Dia One disk holding clip Operating manual

Kent USA TW-32QI Milling Machine

• Manufacturer: Kent USA
• Model: TW-32QI

Good condition Kent USA TW-32QI Milling Machines. Located in USA and other countries. Click request price for more information.