Used Machine Tools in Alabama, USA

MINSTER P2-75
- Manufacturer: Minster
- Model: P2-75
MINSTER P2-75 SERIAL- P2-75-17286 BOLSTER SIZE- 42 X 37 STROKES/MINUTE- 150-300 TONNAGE- 75 LENGTH OF STROKE- 2" SLIDE ADJ, - 4" SHUTHEIGHT- 15" CLUTCH AIR- 60LBS WINTRISS SHADOW 8 LIGHT CURTAINS
Meridianville, AL
DoAll Vertical Band Saw
- Manufacturer: DoAll
Model- 3613-2 S/N- 151-64269 Band length max- 175 File Length- 174 3 Phase 220V Normal Amps- 5.9 Cycle- 60
Meridianville, AL
NIAGARA E-150 GAP FRAME
- Manufacturer: Niagara
MODEL E-150 CAPACITY 150 TON BED SIZE 50''X 30'' RAM SLIDE AREA 34'' X 24'' Y- SLOTTED BOLSTER 48'' X 33'' X 5'' THICKNESS BOLSTER 5'' STROKE 6'' MAX RATED CAPACITY .25 ABOVE BOTTOM STROKE SPM 35 SHUT HEIGHT 20.5...
Meridianville, AL
1983 CHARLES ROSS & SON
- Manufacturer: Ross
CHARLES ROSS & SON ROLLS CAN BE HEATED OR COOLED 240 VAC THREE PHASE EXPLOSION PROOF MOTOR EXPLOSION PROOF HIGH/LOW - STOP SWITCH EXCELLENT CONDITION LISTING ID#25535
Meridianville, AL
1973 TORRINGTON VALL 511 ROTARY END FORMER
- Manufacturer: Torrington
TORRINGTON VALL 511 ROTARY END FORMER RANGE 1'' TO 4'' OD 460 VOLT 6 PH LISTING ID#25537
Meridianville, AL
SCIAKY 75 KVA SPOT WELDER
- Manufacturer: Sciaky
SCIAKY 75 KVA SPOT WELDER 75 KVA 780 VAC 3 PHASE 36'' THROAT 5'' STROKE SCIAKY TOUCH-WELD CONTROL
Meridianville, AL
Kalamazoo Automatic Ferrous Cutting Saw
- Manufacturer: Kalamazoo
- Model: FS 350 A
Kalamazoo Automatic Ferrous Cutting Saw Blade speeds: 30/60 RPM | Blade arbor diameter: 1.2598'' | Flang diameter: 3.375'' | Maximum blade size: 13.75'' | Maximum vice opening: 6.25'' | Work height: 37.5''
Meridianville, AL
DoAll TF-1421H Vertical Band Saw
- Manufacturer: DoAll
- Model: TF-1421H
DoAll Vertical Band Saw Tilt Frame 45 Degrees Right or Left Manual Hydraulic Vice
Meridianville, AL
DAKE SENI-AUTOMATIC NON-FERROUS COLD SAW
- Manufacturer: Dake
- Model: 370S
CAN MITER UP TO 45 DEGREES SOLIDS 3-5/8'' SQUARE 4'' 4.5 HP DRIVE WEIGHT 1350 LBS LISTING ID#25530
Meridianville, AL
1960 BERTSCH INITIAL PINCH PLATE ROLL
- Manufacturer: Bertsch
- Model: 14
Used Bertsch #14 Initial Pinch Plate Roll Rated Capacity:13'X 3/4'' Mild Steel / 4'X1-3/4'' Mild Steel. Initial Pinch Three Roll Arrangement Air Drop End Rear Roll Adjustment With Dial Indicator Coning
Meridianville, AL
1991 BRADBURY RAFTED ROLLFORM LINE
- Manufacturer: Bradbury
BRADBURY RAFTED ROLLFORM LINE 16 STAND SHAFTS 1.5'' 18'' ROLL SPACE 4'' TO 5.5'' VERTICAL GEAR BOX FOR EACH SET OF 8 STANDS CHAIN DRIVE 7.5 HP 220/440 VOLT BRADBURY PALLET UNCOLIER 2500 LB JOHNSON 16 TON PRE-PUNC...
Meridianville, AL
CONTINENTAL HYDRAULIC PRESS
CONTINENTAL HYDRAULIC PRESS 15 HP HYDRAULIC SYSTEM 220/440 VOLTS (32'' X 10'' BETWEEN COLUMNS) LISTING ID#2553
Meridianville, AL
Trusted Seller
Miller DIALARC HF welder, 460V, 12.4 KW
- Model: Dialarc HF
Miller DIALARC HF welder, 460V, 12.4 KW s/n JA364608 Freight and Local Pickup Available For Sale
$850 USD
Tuscaloosa, AL
Trusted Seller
SPI Micrometer Standards
Micrometer Standards SPI Micrometer Standard 500mm 14-219-0 ($20) SPI Micrometer Standard 400mm 14-215-8 ($15) SPI Micrometer Standard 300mm 14-211-7 ($15) All Micrometers come with a wooden case. Used Standards ...
Tuscaloosa, AL
Trusted Seller
Yardney Water Filtration Systems Inlet Flange 11"; Out 12.5"; Tu
- Manufacturer: Yardney
Yardney Water Filtration Systems Inlet Flange 11"; Out 12.5"; Tube Length 91" we only have the tubes and not the legs Freight and Local pickup available
$2,950 USD
Tuscaloosa, AL
Haas VF-2B Machining Center
- Manufacturer: Haas
- Model: VF-2B
Good condition Haas VF-2B Machining Centers available between 1995 and 2002 years. Located in USA and other countries. Click request price for more information.
USA