Used Lathes in Saxony, Germany

HSW-SCHMID pull-down chuck

• Manufacturer: Schmid

Pull-down chucks, 3-jaw chucks, three-jaw chucks, power chucks HSW-SCHMID Flange diameter ( inside ): Ø 105 / 100 mm, depth: 10 mm ( conical ) used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS can be combined with WZ239 ! Outside ø: 305 mm | Hole circle ø: 280 mm | Bolt circle flange ø: 52 / 135 mm | Bore ø: 25 mm | Thickness: 38 mm | Groove: 10 / 18 mm | Dimensions: 305 x 305 x 38 mm

MEBIS face plate

• Manufacturer: MEBIS

Faceplate MEBIS P315 x 5 ( P315x5 ) Bolt circle: Ø: 105 mm 4 jaws New ! max 710 rpm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS used, tested ! Outside ø: 300 mm | Hole circle ø: 102,5 mm | Height with jaws: 120 mm | Bore ø: 60 mm | Long holes: Ø 15 x 60 mm | Dimensions: 300 x 300 x 120 mm

MEBIS face plate

• Manufacturer: MEBIS

Faceplate MEBIS P 400x8 ( P400x8 ) TGL 30-22313 with one-piece reversible jaws New ! preserved !

ROTO RECORD face plate

Face plate ROTO RECORD with screws for groove ! Outside ø: 500 mm | Hole circle ø: 170 mm | Bore ø: 135 mm | Dimensions: 500 x 500 x 165 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS used, tested ! Outside ø: 630 mm | Hole circle ø: 290 mm | Height with jaws: 185 mm | Bore ø: 62,5 mm | Long holes: Ø 21 x 120 / 150 mm | Dimensions: 630 x 630 x 190 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate Pagus used, tested ! External ø: 900 mm | Hole circle ø: 235 mm | Bore ø: 150 mm | Flange ø: 300 mm | Dimensions: 900 x 900 x 300 mm

SEW gearmotor with brake

Geared motor with brake SEW FHF37DT80K4/BMG/TH/ISU4 0.55 kW 58 rpm 400 V IP5 4 New !

CMB energy chain

Energy chain, energy guiding chain, closed CMB TD35/250 Spare part e.g. for lathe CMB TD35/250 ! used, tested !

WMW, ABW Centering point

• Manufacturer: WMW

Center point, lathe point, center punch point, live center WMW, ABW ZN206 MK6 full center used, tested !

CMB telescopic cover

Telescopic cover, left side CMB TD35/250 Spare part e.g. for lathe CMB TD35/250 ! See also S3067 and S3068 ! used, tested !

WMW Centering point

• Manufacturer: WMW

Center point, lathe point, center punch point WMW, ABW ZNA 205 TGL8893 MK 5 As good as new ! Dimensions ( center point without inserts ): 226 x 93 x 93 mm

NAREX magnetic disk

Magnetic plate, permanent magnetic lathe chuck NAREX Flange ( rear side ): Flange diameter: Ø 215 / 250 mm 3x threaded hole: M10 x 1.5, depth: 15 mm New !

CMB clamping table

Clamping table, clamping plate, milling table, machine table CMB TD 35/250 Guide groove: width: 50 mm, depth: 18 mm ( underside ) Spare part e.g. for lathe CMB TD35/250 ! used, tested !