Used Lathes in Germany

Hydraulic power chuck from – Ø 215 mm 36443

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks

Electric tensioner from Berg - FSP 140 U 23298

• Manufacturer: Berg

Clamping motor for wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck, power chuck hydraulic motor electric clamp

Repar2 Robust Wire Chuck Shield Mount Arm

• Manufacturer: Repar2

Increase the safety and efficiency of your machining operations with the Repar2 wire chuck shield mount arm. This arm designed for metal lathes facilitates the mounting of the chuck shield and effectively deflect...

FORKARDT F 200 Wedge Bar Chuck

3-jaw chuck with 1 set of drill jaws Short cone mount size 6 (bolt circle 133.4mm) Bayonet Lock Feed wrench Diameter 200 mm Height 150 mm Passage 55 mm Machine weight approx. 30kg

FORKARDT F 200 Wedge Bar Chuck

3-jaw chuck with 2 sets of drill jaws Short cone mount size 11 (bolt circle 235mm) Bayonet Lock Feed wrench Diameter 500 mm Height 250 mm Passage 150 mm Machine weight approx. 0.2 t Dimensions L x W x H 0.5 x 0.5...

Bezel from Stankoimport – 36642.M44 Diameter 75 mm 36526

• Manufacturer: Stankoimport

steady rest, steady rest, lynette Bezel: max. passage Ø 75 mm | Type: 36642.M44 | Tip height: approx. 125 mm see photos | Dimension ges.: 135/310/260 mm | Mass: 7,3 | Dimensions: 135/310/H260 mm

Face plate from – Ø 450 mm 36432

Faceplate, faceplate chuck, four-jaw chuck, facing chuck

Interchangeable jaws top jaw set from – width 20 mm 35441

interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws

Steady rest moving from – center height 145 mm 35225

Steady rest travelling, travelling steady rest, steady rest, steady rest, lynette

Interchangeable jaws 3 set from Forkardt – width 45 mm helical toothed 36345

• Manufacturer: Forkardt

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks

Lathe S 410

Condition: New machine Rotation diameter over bed [mm]: 410 Center distance [mm]: 1000 Spindle bore [mm]: 52 Main drive [kW]: Swing diameter over support [mm]: 255 Swing diameter in offset [mm]: 580 Speed range [...

Lathe S 460

Condition: New machine Rotation diameter over bed [mm]: 460 Center distance [mm]: 1500 Spindle bore [mm]: 80 Main drive [kW]: 5.5 Speed range [1/min]: 25-2000 Swing diameter over support [mm]: 274 Rotation diamet...

POTISJE PD 1250 Big lathe, swing 1300 x 6000 mm

• Manufacturer: Potisje

swing over bed 1300 mm, over cross slide 1000 mm dbc 6000 mm bore 130 mm speed 1,6 - 630 1/min, stepless in 3 ranges

Lathe TOS SN 32

• Manufacturer: TOS

Circumferential diameter over bed [mm]: 330 Rotation diameter over support [mm]: 168 Center distance [mm]: 1000 Speed range [1/min]: 14-2500 Equipment / accessories: Taper guide device, lathe chuck, safety devices