Used Ibc Tanks in Germany

1070 liter heat-/coolable container, Aisi 304

• Manufacturer: Behälter KG Bremen

Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate remarks: Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the out...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

1000 liter Container, Aisi 304

remarks: Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos)

1050 liter container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (lacquered); 1 longitudinal sight glass; ball valve glued;

550 liter container, Aisi 304

remarks: Manhole diameter approx. 410 mm; Container partially with dents

1500 liter bulk container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame made of AISI304/316; Manhole diameter approx. 455 mm; At the end of the cone there is 1 opening with a diameter of approx. 600 mm (closure for this opening is missing)

800 liter container, Aisi 304

remarks: Container with dents; Bent hand lever of the outlet valve on 1 container

1200 liter conical container made of stainless steel 316

remarks: 4-legged frame made of stainless steel 304; cone height approx. 650 mm; manhole diameter approx. 410 mm (fastening screws partially incomplete); 7 containers with stacking ring in the upper bottom; hand ...

1200 liter conical container made of stainless steel 316

remarks: 4-legged frame made of stainless steel 304; cone height approx. 580 mm; manhole diameter approx. 455 mm; outlets slightly bent upwards (hand lever of the disk tap bent in one container).

1000 liter conical container made of stainless steel 316

• Manufacturer: Azzini

remarks: Frame, Fe (galvanized); minor dents in the upper bottom; clamping ring of the manhole cover missing; disc tap very stiff (possibly defective)

1100 liter conical container made of stainless steel 304

• Manufacturer: Thyssen Umformtechnik

remarks: frame, Fe galvanized); the top of this container is slightly dented, it has minor dents in the wall and 1 screw connection of the manhole cover is missing

1000 Liter heat-/coolable container, Aisi 304

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Frame, Fe (galvanized); double jacket must be filled with heat transfer oil on site for heating; this is he...

800 Liter Container, Aisi 316

remarks: Diameter of manhole approx. 385 mm; slight differences in design; 1 container with a type plate (hard to read) and with outlet, pipe diameter inside approx. 35 mm (this container has a smaller dent in th...

1000 Liter Container, Aisi 304

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 mm; slight differences in the design of the containers; container with dents in the lower bottoms; 1 container with screwed screw holder made of Fe...

1000 Liter Container, Aisi 316

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized; slight signs of corrosion); diameter of manhole approx. 415 mm; screwed screw holder made of Fe (galvanized) outside around the manhole collar; dents in the lower bottom